Microcontrollers(650)

Smart Home Audio(325)

M091YC2AE

M091YC2AE

The M091YC2AE is 32-bit microcontroller is designed for analog sensor applications. It features rich analog peripherals including 4 sets of 8 MHz gain bandwidth (GBW) with 50 µV input offset voltage operational amplifier (OPA), 4 sets of 12-bit DAC, 16 channels of 2 MSPS 12-bit SAR ADC, built-in temperature sensor with ±1.6°C deviation from 0°C to 70°C and ±2°C deviation from -40°C to 105°C.

The M091YC2AE is based on Arm Cortex-M0 core with 32-bit hardware multiplier/divider. It runs up to 72 MHz and features 32 Kbytes Flash memory, 8 Kbytes SRAM, 2.7V ~ 3.6V operating voltage, 5V I/O tolerance, and -40°C to +105°C operating temperature.

The M091YC2AE provides plenty of peripherals including up to 6 sets of 32-bit timers, 1 set of UART with RS485 and One-wire mode, 1 set of SPI, 2 sets of I²C supporting 1 MHz Slave mode, 6 channels of 16-bit BPWM, and up to 7 channels of PDMA to offload CPU loading.

To fit the small form factor requirement of the analog sensor, the M091YC2AE provides the QFN 48-pin (5x5 mm) small form factor package to make the neat and compact PCB design.

For the development system, Nuvoton provides the NuMaker evaluation board and Nuvoton Nu-Link debugger. The 3rd Party IDE such as Keil MDK, IAR EWARM, and Eclipse IDE with GNU GCC compilers are also supported.

Target application:

  • Photoelectric sensor
  • Pressuer sensor
  • Positioning sensor

Key Features:

Operating characteristics
  - Voltage range: 2.7V to 3.6V
  - Temperature range: -40°C to +105°C
  - EFT 4.4 kV
  - ESD HBM 4 kV
   
Core
  - Arm Cortex-M0 core running up to 72 MHz
   
Memories
  - 32 KB Flash
  - 8 KB SRAM
  2 KB Flash for user program loader (LDROM)
  512 Bytes security protection ROM (SPROM)
  - ISP/ICP/IAP programming
   
Clocks
  - Internal 48 MHz HIRC (high speed RC oscillator) with variation ± 2 % within all temperature range, variation ± 0.7 % within 0 °C to 70 °C, ±1 % within -20 °C to +105 °C
  - Internal 38.4 kHz LIRC (low speed RC oscillator)
  - One on-chip PLL up to 144 MHz
   
Power management
  - Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
  - Normal run: 246 μA/MHz 
  - Power-down: 4 mA
  - Supports wake up from Power-down mode by: All GPIO pins, WDT, TIMER, UART, I²C, SPI, WWDT
   
Timers
  - Up to six 32-bit timers
  - One 24-bit SysTick timer
  - One Independent watchdog
  - One window watchdog
   
PDMA
  - Up to 7 channels that can be operated by – software trigger, SPI, UART, I²C, ADC, DAC, PWM and Timer
     
BPWM
  - Up to 6 channels of BPWM with one 16-bit timer
   
Cryptography Accelerator
  - Support configurable polynomials
   
Analog
  - 4 sets of 8 MHz GBW with 50 µV input offset voltage OPA
  - 4 sets of 12-bit DAC
  - Internal reference voltage 2.048/2.5V with 1.5mA external devices driving current capability
  - 16 channels of 12-bit 2 MSPS SAR ADC
  Temperature sensor with ±1 .6°C deviation within 0°C to 70°C and ± 2°C deviation within all temperature range
  Supports DAC output retention when system reset
   
Communication interfaces
  - 1 set of UART
  - 2 sets of 1MHz I²C interfaces
  - 1 set of SPI interface (Master mode: 24MHz, Slave mode: 16 MHz)
     
Hardware Manchester Codec
  - Manchester encoded/decoded data
  - Configurable Manchester format
  - Configurable Manchester Code Bit Rate
  - Supports programmable 8/16/32-bit CRC polynomials
  - Supports PDMA transfer
     
29 I/O with interrupt capability
  - Schmitt trigger input
  - Four I/O modes
  - Supports independent pull-up control
     
Serial Wire Debug (SWD)
  - Nuvoton Nu-Link debugger support
     
96-bit Unique ID ( UID )
     
128-bit Unique Customer ID ( UCID )
     
Package
  - QFN48 (5 mm x 5 mm)
     
Evaluation Board
  - NuMaker-M091YD