Microcontrollers(650)

Smart Home Audio(325)

ML56LD1AE

ML56

NuMicro® ML56LD1AE is embedded with based on 1T 8051-based CMOS microcontroller, built-in LCD driver and capacitive touch, runs up to 24 MHz at a wide voltage range from 1.8V to 3.6V, and features 64Kbytes flash, 4Kbytes SRAM, and 4K Kbytes loader ROM for the ISP. It is also equipped with plenty of peripheral devices, such as up to 42 GPIO, Timers, Watchdog Timer, Window Watchdog Timer, UART, SPI, I²C, PWM Timer, 12-bit ADC, provides multiple packages: LQFP48.

Target Application:

  • Home appliances
  • Thermostat
  • Handheld meters

Key Features:

1T 8051-based CMOS microcontroller running up to 24 MHz
  - Built-in LDO for wide operating voltage ranges from 1.8V to 3.6V
  - Temperature range: - 40 ℃ to 105 ℃
   
Flash Memory
  - 64 Kbytes Flash for program code
  4 Kbytes flash for ISP loader
   
SRAM Memory
  - 4 Kbytes embedded SRAM
     
Clock Control
  - 4 to 24 MHz HXT crystal oscillator or external input clock
  - 32.768 kHz LXT crystal oscillator or external input clock for low-power system operation
  - Internal 24 MHz HIRC oscillator variation < ± 4 % within all temperature and full voltage range
  - Support software trim function to ± 0.25 % deviation within - 40 ℃ ~ 105 ℃
  - Internal 38.4 kHz LIRC with variation < ± 10 %. Add software trim mechanism for UART 2 % accuracy
     
LCD Driver
  - Support Internal resistor bias, capacitor bias, capacitor bias
  - Support programmable internal VLCD charge pump mod
  - 1/2, 1/3, 1/4 bias selectable
  - Maximum 4 COM x 32 SEG, 6 COM x 30 SEG, 8 COM x 28 SEG
     
Touch key
  - Supports 6 touch key + 1 reference pin
  - Programmable sensitivity levels for each channel
  - Programmable scanning speed for different applications
  - Supports single key-scan and programmable periodic key-scan
     
4-ch PDMA controller
   
RTC with Calendar and Alarm
   
PWM
  - Up to 12*16-bit channel PWM outputs or 6 complementary paired PWM outputs
  - Support Dead-Zone generator for complementary paired PWM
  - Support Capture interrupt
     
ADC
  - 10 ch 12-bit SAR ADC with 500 kSPS
     
2 Analog comparator
     
Connectivity
  - Up to 2 SPI
  - Up to 2 I²C
  - Up to 2 UART
  - Up to 2 smart card interface
  - Up to 42 GPIO
     
Package
  - LQFP48