Microcontrollers(606)

Smart Home Audio(325)

M071VG4AE

M071VG4AE

The NuMicro® M071VG4AE series is a 32-bit microcontroller based on Arm Cortex®-M0 core, with the hardware divider, targeted for smart home appliance applications. It offers up to 72 MHz CPU frequency, 256 KB Flash memory for code storage, 20 KB SRAM for runtime operation and configurable Data Flash memory for parameters. Additionally, in response to the code security requirements, the M071VG4AE series integrates 2 KB SPROM (Security Protection ROM) to provide a secure code execution area to protect the developer's intellectual property. The M071VG4AE series also supports online updates using In-System Programmer (ISP), In-Circuit Programmer (ICP) and In-Application Programmer (IAP). The In-System Programmer (ISP) with 4 KB Loader ROM (LDROM) supports firmware updates through the Firmware Over-The-Air (FOTA) process. Besides, a Peripheral Direct Memory Access (PDMA) is provided to reduce the data access overhead of CPU core to peripherals.

The M071VG4AE series supports plenty of peripherals, including one built-in temperature sensor with 1°C resolution, adjustable VDDIO pins to meet a wide voltage range from 1.8V to 5.5V, 12 channels of 16-bit 144 MHz high-speed PWM for precise control, 3 sets of UART, 1 set of SPI/I²S, 2 sets of I²C, and a real-time clock (RTC). The M071VG4AE series also provides rich analog peripherals including 20 channels of 12-bit ADC and 2 sets of ACMP.

Target Application:

  • Main control of White Goods
  • Main control of Smart Home Appliances
  • Industrial control
  • Motor control
  • Metering applications
Operating Characteristics
  - Operating voltage from 2.5V to 5.5V
  - Operating temperature from -40°C to 105°C
  - ESD HBM 8 kV
  - EFT 4.4 kV
   
Core
  - Arm® Cortex®-M0 core running up to 72 MHz
  - Single-cycle 32-bit hardware multiplier
  - 32-bit hardware divider
  - NVIC for 32 interrupt inputs, each with 4-levels of priority
   
Memories
  - 256 KB application ROM (APROM)
  - 4 KB Loader ROM (LDROM)
  2 KB Security Protection ROM (SPROM)
  Up to 256 KB Data Flash memory with configurable memory size
  - 2 KB page erase for all embedded Flash memory
  - 20 KB embedded SRAM
   
Clocks
  - Built-in 4~20 MHz high speed crystal oscillator for precise timing operation
  - Built-in 32.768 kHz low speed crystal oscillator for Real Time Clock (RTC)
  - Dynamically calibrating the HIRC to 22.1184 MHz by external 32.768 kHz crystal oscillator (LXT)
  - Built-in 48 MHz internal high speed RC oscillator (HIRC) (Frequency variation < 2% at -40°C ~ +105°C)
  - Built-in 10 kHz low speed RC oscillator (LIRC) for Watchdog Timer and Wake-up operation
  - PLL up to 144 MHz for high resolution PWM operation
   
Power management
  - Three power modes: Normal run, Idle and Normal Power-down mode
  - Wake up from Normal Power-down mode by RTC, WDT, I²C, Timer, UART, BOD, GPIO
   
Timer & PWM
  - 4 sets of 32-bit timers with 24-bit up-timer and one 8-bit pre-scale counter
  - 2 PWM modules; each module provides 6 output channels
  - 1 Watchdog Timer
  - 1 Windows Watchdog Timer
   
PDMA
  - 5 channels of PDMA
  - Supports CRC
     
Analog Peripheral
  - 1 set of 12-bit, 12 channel, 1 MSPS SAR ADC
  - Built-in internal reference voltage
     
Connectivity
  - 3 sets of UART with IrDA
  - 2 sets of I²C device interfaces with SMBus/PMBus (up to 1 Mbps)
  - 2 SPI/I²S interface (up to 36 MHz in Master Mode)
   
Cyclic Redundancy Calculation (CRC)
   
Real Time Clock (RTC)
     
Up to 85 I/O pins with interrupt capability
     
IEC60730-1 Class B
  - Certified IEC60730-1 Class B Software Test Library (STL)
     
Development Platform Support
  - Arm Keil RVMDK and IAR EWARM IDE
  - Free GNU compiler with Eclipse IDE support
  - ICP (In Circuit Programmer) support for updating internal code via Nu-Link debugger
  - ISP (In System Programmer) support for updating code through UART, SPI, I²C, RS-485
  - Pin Viewer for real time monitoring the status of all I/O pins
  - PinConfigure tool for pin assignment, initial code generation and OrCAD/Protel part generation
     
96-bit Unique ID (UID)
     
128-bit Unique Customer ID (UCID)
     
Package LQFP100(14x14) pitch 0.5mm
     
This website uses cookies to ensure you get the best experience on our website. Learn more
OK