Microcontrollers(650)

Smart Home Audio(325)

M2351ZIAAE

The M2351ZIAAE microcontroller series is powered by Arm® Cortex®-M23 core with TrustZone® for Armv8-M architecture, which elevates the traditional firmware security to a new level of robust software security.

The low-power M2351 series microcontroller operates at up to 64 MHz frequency, with up to 512 KB embedded Flash memory in dual bank mode, supporting secure OTA ( Over-The-Air ) firmware update and up to 96 KB embedded SRAM . Furthermore, the M2351 series also provides high-performance connectivity peripheral interfaces such as UART , SPI , I²C , GPIOs, USB and ISO 7816-3 for a smart card reader. Its secure and efficient power management features strengthen the innovation of IoT security.

 Key Features:

Security Core
  - Arm® Cortex®-M23 core delivering 0.95 DMIPS per MHz
  - TrustZone® for ARM®v8-M
  - 32-bit Single-cycle hardware multiplier and 32-bit 17-cycle hardware divider
  - Up to 8 regions MPU_NS ( for non-secure world )
  - Up to 8 regions MPU_S ( for secure world )
  - 8 Security Attribution Unit ( SAU ) memory regions
 
Memories
  - Up to 512 KB of dual bank Flash memory. Dual bank Flash memory allows read-while-write programming
  - Up to 96 KB SRAM , first 32 KB SRAM with hardware parity check
  - 4 KB Flash for user program loader ( LDROM )
  - 2 KB OTP for general-purpose control use, ( 2 KB data + 1 KB lock bit ) easy for PLM ( Product Lifecycle Management ) implementation
  - 32 KB Secure Boot ROM
  - ISP / ICP / IAP programming
 
Power management
  - Normal run: 97 μA/ MHz ( LDO ) ; 45 μA/ MHz ( DC-DC )
  - Idle: 36 μA/ MHz ( CPU clock disabled, LDO ) ; 17μA/ MHz ( CPU clock disabled, DC-DC )
  - Power-down: 20 μA
  - Standby power-down: 3.0 μA
  - Deep Power-down: 4.0 μA ( with VBAT )
  - Deep Power-down: 1.5 μA ( without VBAT )
  - VBAT supply for RTC:  2.5 μA ( 80 bytes spare registers )
 
Crypto and Security
  - True random number generator ( TRNG )
  - AES 256/ SHA 384/ 3-DES/ DES
  - The ECC accelerator is a fully compliant implementation for the prime field GF ( p ) and binary field GF ( 2m ) algorithms. The prime field GF ( p ) supports up to NIST P-521. The binary field GF ( 2m ) supports up to NIST B-571 and NIST K-163, K-233, K-283, K - 409, and K-571.
  - CRC calculation unit 
 
Communication interfaces 
  - Up to 11 UART interfaces ( up to 10.66 MHz ) , with up to 3 ISO-7816-3 interfaces, 6 RS-485, 6 IrDA and 2 LIN interfaces
  - Up to 5 I²C interfaces ( up to 1 Mbps ) , with up to 3 I²C with SM Bus/ PM Bus
  - Up to 6 SPI interfaces ( up to 64 MHz ) , with 3 I²S interfaces, additional 1 Quad- SPI interface
  - Up to 4 I²S interfaces, 3 I²S shared with 3 SPI
  - Secure Digital I/O ( SDIO ) ( up to 50 MHz )  
 
Advanced connectivity 
  - USB 2.0 full speed OTG controller with on-chip PHY
  - One CAN interface up to 1 Mbps ( CAN 2.0A and 2.0B standard )
  - Support crystal-less USB 
 
Operating Characteristics
  - Running up to 64 MHz
  - Voltage range: 1.7V to 3.6 V
  - Temperature range: - 40 ℃ to +105 ℃
  - Selectable core power voltage levels: 1.26V, 1.2V in run and idle mode
 
Packages ( RoHS )
  - QFN 33-pin