Smart Home Audio(325)


Not Recommended for New Design (NRND)

Recommended Part Number : NuMaker-HMI-M032

The NuMaker-emWin-M032 is an evaluation board for GUI application development on emWin library. The NuMaker-emWin-M032 consists of two parts: a NuMaker-M032KI main board and a NuTFT extension board. The NuMaker-emWin-M032 is designed for project evaluation, prototype development and validation with power consumption monitoring function.

The NuMaker-M032KI consists of two parts: an M032KI target board and an on-board Nu-Link2-Me debugger and programmer. The M032KI target board is based on NuMicro M032KIAAE. For the development flexibility, the M032KI target board provides the extension connectors of M032KIAAE, the Arduino UNO compatible headers and the capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter connector can measure the power consumption instantly, which is essential for the prototype evaluation.

In addition, there is an attached on-board debugger and programmer “Nu-Link2-Me”. The Nu-Link2-Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the evaluation board and become a stand-alone mass production programmer.

The NuTFT can be plugged into the main board via the Arduino UNO extension connector. The NuTFT is equipped with one SPI Flash, one ILI9341 2.4” SPI TFT LCD touch panel, one five-direction joystick and two push buttons.

Board Features

NuMaker-M032KI Main Board Features

NuMicro M032KIAAE with function downward compatible with:
  M032KIAAE full pins extension connectors
  Arduino UNO compatible extension connectors
Ammeter connector for measuring the microcontroller’s power consumption
Fixable board power supply:
  - External VDD power connector
  - Arduino UNO compatible extension connector Vin
  - USB FS connector on M032KI target board
  - ICE USB connector on Nu-Link2-Me
On-board Nu-Link2-Me debugger and programmer:
  - Debug through SWD interface
  - On-line/off-line programming
  - Virtual COM port function

NuTFT Extension Board Features

16 Mbits (2 MB) SPI Flash (W25Q16CV)
ILI9341 2.4” (320x240) SPI TFT LCD Panel with 4-Wire ADC Touch Function
Five-direction Joystick
Two Push Buttons


Nuvoton Official Forum


Nuvoton eStore


TechDesign eMarket(Partner Channel)

*Ordering Number: NK-M032


This website uses cookies to ensure you get the best experience on our website. Learn more