A HMI and RTU industrial automation solution demo which is designed by Nuvoton’s partner. Nuvoton NUC970 series supports 2D Graphic and RGB 24-bit LCD display interface. With different LQFP package and DRAM embedded, NUC970 provides a solution platform for HMI products. NUC980 series does not have graphic engine, but supports up to 10 UARTs with DMA mode. Using DMA mode can reduce CPU loading and provides a better computing requirement. NUC980 series also supports different wireless modules. It is suitable for Industrial IoT applications. #Application #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/numaker-nuc980-iiot contact us: SalesSupport@nuvoton.com

The rich features of NuMaker IoT platforms have been certified by several RTOS and clouds. In this video, we introduce the NuMaker-IoT-M487 development board, supported OS and clouds, and an IoT demonstration. #Application #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ contact us: SalesSupport@nuvoton.com

The ML51 is a Flash embedded 1T 8051-based microcontroller. The instruction set of the ML51 is fully compatible with the standard 80C51 with performance enhanced and low power consumption. The ML51 runs up to 24 MHz at a wide voltage range from 1.8V to 5.5V, and contains up to 64/32/16/8 Kbytes Flash called APROM for programming code. The ML51 Flash supports In-Application-Programming (IAP) function, which enables on-chip firmware updates. The ML51 includes an additional configurable up to 4/3/2/1 Kbytes Flash area called LDROM, in which the Boot Code normally resides for carrying out the In-System-Programming (ISP). - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ml51-series/ contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en 0:00 簡介 0:20 Agenda 0:45 NuMicro Product Portfolio 1:28 2019 Brand New MCU Platform 2:06 ML51/ML54/ML56 Series Portfolio 3:29 ML51 Series Low 4:50 NuMicro Naming Rule 6:06 NuMicro® ML51 Features 8:19 4 Different Power Modes 10:44 Low Power Mode Features • Wake up resource: WKT, ACMP, GPIO 12:37 Low Power VS Battery Life 13:28 ADC 15:00 Comparison of 8-bit Products Feature 17:13 Fire Fighting System 21:30 Battery Management System (BMS) 22:30 Gaming Phone 23:36 Development Board 24:13 Development Environment

In this webinar, we discussed the Nuvoton NuMaker IoT Platforms that are supporting Arm Mbed OS and Pelion Device Management services. We also showcased how you can use these reference designs to build and manage your smart IoT devices and applications. Host: Austin Blackstone, Lead Developer Evangelist - Arm Pelion / Mbed OS Speaker: Morgan Du, Principal Engineer - Nuvoton IoT Development Slides: https://drive.google.com/file/d/1xSSzc0RBZXPjgrEwlC53MFNNMK7vVBOB/view?usp=sharing Learn more about the Nuvoton IoT platform: https://bit.ly/3gRRvSX Learn more about the Nuvoton NuMaker-IoT-M487 platform: https://bit.ly/2QSafqW Shop the NuMaker-IoT-M487 development board: https://direct.nuvoton.com/en/numaker-iot-m487 #Product #Application #Webinar #General #en

以新唐 NuMaker NUC980 IIoT 為平台，使用 Linux 進行開發，學習開發各式功能，觀看本片，您將學會在 NuMaker NUC980 IIoT上使用 Ethernet 連接到 AWS IoT 服務。 大家好我是新唐工程師 Miya，今天要為各位介紹，如何使用 NuMaker NUC980 IIoT 開發平台連接 Amazon 的物聯網，以下簡稱 AWS 連結網址 https://aws.amazon.com/ ，登入 AWS 帳號 點擊右上角的 “Sign In to the Console”，進入帳號登入頁面 輸入您的帳號密碼，點擊 “Sign In” 進行登入 登入之後，進到 “AWS 管理控制台” 頁面 在搜尋欄位，輸入 “IoT Core”，會出現 IoT Core 連結，點擊進入 在左邊的欄位選擇 “入門” 頁面 在 “設定裝置” 點擊 “開始使用” ，開始設置 IoT 裝置 選擇連接 AWS IoT連線方式。platform 請選擇 Linux， SDK 請選擇 Python。 點擊 “下一步” 進到下一個頁面。 接下來開始註冊一個 IoT Thing，有三個步驟。 首先命名 IoT Thing，接著按下一步。 這個連線套件不會用到，按取消之後跳到下一步。 接下來2個頁面直接按 “完成” “完成”。 系統會跳回到管理頁面。 點擊左側選單 “管理”  “實物”。可以看到剛剛建立的 my-IoT 出現在 IoT Thing 裡面了。 接下來要對這個新建立的 Thing 做一些設定，直接點擊新建立的 Thing-my-IoT，進入管理頁面。 在左側選單，選擇 “互動” 。 在互動頁面裡可以看到 Thing 的 HTTPS 連結。 複製此 HTTPS，用戶端應用程序需要知道這個連結，才能夠連接到這個 IoT Thing。 接下來下載安全憑證，請在頁面左側選單，點擊 “安全”，進入憑證頁面。 然後點擊 “建立憑證”。 憑證建立完成會產生三個檔案，分別是憑證、公鑰及私鑰。分別點擊 “下載”以下載這三個檔案，NuMaker NUC980 IIoT 開發平台用戶端進行 AWS IoT 連線的時候會用到。 下載完成之後，點擊 “啟用”，使這個安全憑證生效。 接著還需要下載 AWS IoT 的根憑證，點擊 “CA 下載” 連結，以開啟另一個瀏覽頁面。 點 CA Certificates for Service Authentication 連結，系統會跳到 AWS IoT root CA 的下載頁面。 請選擇第一個根憑證，RSA 2048 bit key，按滑鼠右鍵，另存連結，存到檔案 “AmazonRootCA1.pem”。 下載完成之後，回到剛剛的頁面。 接下來，點擊 “連接政策”，進行 policy 設定。 點擊 “建立新政策”以建立一個新的 policy。 先輸入 policy 名稱。 選擇 “進階模式”，直接編輯 policy 內容。 在Effect 敘述輸入 Allow，允許操作。 在 Action 敘述輸入 “I:*”，接受所有的 IoT 命令。 在 Resource 敘述輸入 “*”， 允許取用 resource。 按 “建立” 建立新的 Policy。 在左側選單，重新點擊 “管理”→ “實物”，選擇 my-IoT thing，回到 my-IoT 頁面。 再次點擊 “安全”，然後選擇剛才建立的憑證。 在憑證頁面左側的選單選擇 “政策”。目前 Policies 還是空的。 打開右上角的 “動作”下拉選單，選擇 “連接政策”。 在 Policy 列表裡面，會出現剛才新建立的 Policy。打勾選取，然後按 “連接 “，完成 policy 的附加。 這時候 Policies 頁面就會出現我們所選擇的 Policy 了。到這邊已經建立好了雲端的 IoT Thing。接下來，要在 NuMaker NUC980 IoT 板上建立用戶端 IoT 應用。 請連接網址 tls.mbed.org/download 以下載 mbedTLS library。 點擊連結 mbed TLS 2.16.3(Apache) 進行下載儲存。 接下來要將把下載的 mbedTLS library 複製到 NUC980 Linux 開發環境下；先解壓 mbedTLS library後，用 git 下載 AWS 的 SDK。 git clone https://github.com/aws/aws-iot-device-sdk-embedded-C 下載完成之後，先刪除他在 external lib 目錄下的 mbedTLS 目錄，這是個空目錄。 將先前下載解壓後的 mbedTLS 目錄移動到 external lib 目錄下就可以直接編譯 AWS SDK 的範例了。 進到 AWS SDK 的 samples 目錄下的 Linux 目錄下可以看到 5 個 範例。要使用的範例是最底下這個 subscribe_publish_sample。 進到這個範例的目錄下。 有三個檔案，需要作一些修改。 首先修改 makefile，將 compiler linker 由 gcc，改為 NUC980 Linux toolchain 的 compiler linker。 51. 往底下找到 CRYPTO_LIB_DIR，修改路徑，將 crypto 刪除，這樣 makefile 就完成修改了。 (~00:25) 52. 接著是 header file，修改MQTT HOST 連結路徑，先前我們在 IoT thing 的 “互動” 頁面所複製 的 HTTPS 連結，將它貼到這裡。(~00:46) 53. CLIENT ID 請任意取一個名稱，不要與其他用戶端名稱重複即可。(~00:55) 54. MY THING NAME 要用前面建立的 IoT Thing 的名稱: my-IoT。(~01:02) 55. 底下的 ROOT CA file name，IoT Certificate file name，以及 IoT private key filename。 56. 前面在建立 IoT Thing 安全憑證過程中，有下載了 Root CA 及 IoT 安全憑證幾個檔案，請將 檔案名稱填寫到這裡。 最後是修改 點 C，系統會將範例程式執行檔放到 root file system 的 usr/bin 目錄下，並將憑證檔案放到 usr/certs 目錄下。 這裡請將憑證指定目錄改為 相對路徑的 ../certs。 接著打 make 直接進行編譯。 編譯需要幾分鐘的時間，影片跳過了編譯部分。 接下來，將編譯好的應用程序複製到 rootfs 的 /usr/bin 目錄下。 然後將根憑證及 IoT 安全憑證檔案複製到 rootfs 的 /usr/certs 目錄下。這裡已經事先複製好了。完成後到 BSP Linux 目錄下，編譯 kernel。 將 kernel 上傳到 IoT 開發板上面執行。 下 ifconfig + udhcpc 指令連接網絡。 由於憑證有時效性問題，需要修改系統時間，以免因為憑證過期導致無法連接。 進到 usr/bin 目錄下，執行 AWS用戶端範例程序。 可以看到用戶端已經成功連接 AWS 雲端。這個範例會不斷地發佈並且接收訊息。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-nuc980-iiot 聯絡我們： SalesSupport@nuvoton.com

Tubular motors can be easily seen everywhere such as curtains, rolling doors, and automatic clothes racks. As the concept of home automation is spreading widely, those products become more and more popular. Nuvoton provides completed platform, ML51 series for different needs of tubular motors. It’s based on 1-T 8051 core, running up to 24 MHz core speed. It provides 12-bit ADC detecting motor current and up to 2 sets of analog comparators for overcurrent and overvoltage protection. Much higher safety features for the tubular motors are realized. 105-degree high-temperature resistance makes it suitable for control box exposed outdoors. As for the multiple noises and inference environment, ML51 series provides strong immunity like 8 kV ESD and 4.4 kV EFT. Hello, everyone, welcome back to Nuvoton’s YouTube channel, I am the product manager of microcontrollers. Today I am going to show you our successful story, home automation with the Tubular motor, which adopts our latest industrial microcontroller, ML51 series. Today the topic we are going to talk about is the home automation and motorization system for curtain and doors. These tubular motors can be easily seen around everywhere, like curtain, rolling door, garage door, and automatic clothes rake…and so on. As the concept of home automation is spreading widely, those products are more and more popular. For example, the automatic curtain is popularly applied in hotel, new building, hospital and new store, why is this product become more and more popular? Lazy economy becomes a new type of consumption demand, people pursue a time-saving and labor-saving product, imagined if you have an emitter to control curtain automatically, and smart adjustment with the brightness of outdoor. And the new product hit the shelf is automatic clothes rake, now this new product is not only a hanger but also integrated with UV light disinfection, heating function and fan controller. About the garage door, now integrated more security function, such as overcurrent protection for device longevity, infrared system can be added to increase anti-pinch security. Nuvoton provides completed platform, ML51 series for different needs of tubular motors. It’s based on 1-T 8051 core, running at 24MHz core speed, provides 12-bit ADC can detect motor current, up to 2 sets of analog comparator to have overcurrent and over voltage protection so can provide much higher safety feature for the tubular motors. ML51 series also provide from 1.8V to 5V power supply, so whether the AC power or the battery supplied can easily be adapts to different power source. This series has up to 105-degree high temperature resistance, which also can be very suitable for control box explore at outdoors. As for the multiple noise and inference environment, ML51 series provides strong immunity like 8 kV ESD and 4.4 kV EFT. Nuvoton provides an easy-to-use development environment, which includes NuMaker board, Nu-Link, BSP and sample codes, those tools can help you shorten your development cycles. On the backside of each development board, you can find the website which the comprehensive information is available. Nuvoton has some successful case in China and Europe. We hope to have more new opportunities after releasing this video. Thanks for watching, if you like this video please give it a thumbs up, if you have any question can also leave a message at bottom, we will have personal to reply the question soon. The ML51 NuMaker boards are now available at Nuvoton official eStore direct.nuvoton.com. Thank you again for staying with us. Hope to see you soon. Bye~ For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: NuMaker-ML51PC/ http://direct.nuvoton.com/numaker-ml51pc NuTiny-ML51EB9AE/ https://direct.nuvoton.com/tw/nutiny-ml51eb9ae contact us: SalesSupport@nuvoton.com

．Why FIDO Authentication ．Security Device for Personal Identity ．USB Dongles Usage ．M2351 USB FIDO Key SDK ．Support Capacitive Fingerprint Sensors ．M2351 USB FIDO Key with TrustZone ．Values Brought by M2351 ．Collaborative Software Development ．An Open Platform with Content Protection ．Leading Market Position for Software Protection For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC #Product #Learning #Basic #en 0:00 簡介 0:28 Why FIDO Authentication 1:19 Security Device for Personal Identity 2:01 USB Dongles Usage 2:29 M2351 USB FIDO Key SDK 3:36 M2351 USB FIDO Key with TrustZone 4:07 Values Brought by M2351 4:55 Collaborative Software Development (2) 6:10 An Open Platform with Content Protection

This video is going to show you our latest Low power ML51 series microcontroller. The ML51 platform features high performance and pin-to-pin compatibility with our 32-bit microcontrollers, such as M480, M031, and M261 series . ML51 series supports up to 24MHz operation frequency, and 1.8V to 5.5V operating voltage, it provides four power modes: normal run mode, low power run mode, low power idle mode, and power down mode. In power down mode with multiple wake-up sources. The power consumption in low power idle mode is down to 13 μA and in power down mode it is less than 0.8 μA. When the clock runs at internal RC oscillator can also allow 9600 baud rate for UART communication. ADC supports up to 8 channels of 12-bit ADC, analog comparator and five levels of the internal reference voltage, ML51 provide two channels of PDMA, strong immunity like 8 kV ESD and 4.4 kV EFT. - For more information, please visit: http://www.nuvoton.com buy now: NuMaker-ML51PC/ http://direct.nuvoton.com/numaker-ml51pc NuTiny-ML51EB9AE/ http://direct.nuvoton.com/nutiny-ml51eb9ae contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

NUC980 Series Microprocessor is a solution designed for industrial control and industrial IoT applications, such as gateway, serial server, remote control unit, plug and play data collector and IoT development platforms. NUC980 series embedded with an ARM9 core supports Linux, FreeRTOS and Non-OS Board Supporting Package. By using MCP technology, NUC980 series supports up to 128 MB DRAM. Not only can NUC980 simplify your hardware design, but help your product time to market. A less-layered PCB and a reduced PCB size can lower the BOM cost. NUC980 supports 2 High Speed and 6 Full Speed USB Host controllers that can be used for a replaceable module due to the plug and play feature of USB interface. Other interfaces include 10 UART, 4 I2C, 3 SPI, 4 CAN BUS, and 2 Camera sensor interface. Designers can use these interfaces to collect or convert the data needed. NUC980 features AES, RSA, SHA and ECC hardware crypto accelerator for CPU offloading. This crypto engine can be applied at data transfer, identification, and key exchange.Nuvoton also provides IoT protocols like HTTP, HTTPS, MQTT, CoAP, openSSL to help customers accomplish a security IoT platform easily. Nuvoton NUC980 adopts MCP technology supporting up to 128 MB DRAM. Developers can design a secure IoT product fast and convenient with the help of the hardware crypto engine. Next, I will introduce related development platforms. NuMaker NUC980 Serial Server Board is suitable for applications like serial server or serial to Ethernet gateways. This develop board includes 2 10/100 Ethernet ports, 8 UART ports, 1 MicroSD Slot, 2 USB ports and 16MB SPI NOR Flash. NuMaker NUC980 USB developer board is suitable for data collection applications. This board includes 1 10/100 Ethernet port, 8 USB ports, 5 UART ports, and 128 MB NAND Flash. NuMaker NUC980 Industrial IOT developer board is suitable for IOT applications. This board includes 1 10/100 Ethernet Port, 2 USB ports, microphone input, earphone output, 128 MB SPI NAND Flash and an Arduino Compatible interface. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: http://direct.nuvoton.com/arm9-mpus/ contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

NUC980為新唐提供的工業物聯網開發平台，適合應用於閘道器、串列伺服器、遠端控制裝置、隨插即用資料採集裝置及物聯網開發平台 NUC980 使用ARM9 內核，支援 Linux/FreeRTOS及Non-OS 的開發套件，採用MCP (Multi-Chip Package)封裝技術，內建最高達128 MB DRAM，讓硬體設計更容易，縮短產品上市時間。因為PCB層數減少、尺寸縮小，成本自然可以降低. 利用 USB具有即插即用的特性，NUC980擁有2組高速及6組全速USB主機控制器，實現可隨時更換模組的需求。其餘周邊介面如: 10組UART、4組I2C、3組SPI、4組CAN BUS及2組CMOS Sensor介面等，透過不同的介面達成資料轉換及資料採集的目的 NUC980內建AES、RSA、SHA及ECC的加解密引擎，可用於資料傳輸、身分認證及公私鑰交換，除了提升運算速度，並可有效降低CPU負載。另外，新唐也提供豐富的物聯網通訊協議，包含HTTP、HTTPS、MQTT、CoAP、openSSL等，幫助客戶加速完成高安全性的物聯網解決方案。 新唐NUC980採用MCP (Multi-Chip Package)技術，內建最高達128 MB DRAM，並提供硬體加解密引擎，協助客戶方便且快速設計安全的連網產品。接下來將為您介紹相關開發平台： -NuMaker NUC980 Serial Server開發板，適合應用於串列伺服器類型的產品開發，此開發板具備2組10/100 網路口、8組UART、1組MicroSD 卡槽、2組USB 接口以及 16 MB SPI NOR FLASH。 -NuMaker NUC980 USB開發板，適合應用於多組USB介面需求的資料採集裝置，此開發板具備1組 10/100 網路口、8組USB、5組UART及128 MB NAND FLASH。NuMaker NUC980 IIOT 開發板適合物聯網應用產品的開發，此開發板具備 1組 10/100 網路口、2 組USB 、麥克風輸入、耳機輸出、128 MB SPI NAND Flash以及 Arduino相容的介面 NUC980 Series Microprocessor is a solution designed for industrial control and industrial IoT applications, such as gateway, serial server, remote control unit, plug and play data collector and IoT development platforms. NUC980 series embedded with an ARM9 core supports Linux, FreeRTOS and Non-OS Board Supporting Package. By using MCP technology, NUC980 series supports up to 128 MB DRAM. Not only can NUC980 simplify your hardware design, but help your product time to market. A less-layered PCB and a reduced PCB size can lower the BOM cost. NUC980 supports 2 High Speed and 6 Full Speed USB Host controllers that can be used for a replaceable module due to the plug and play feature of USB interface. Other interfaces include 10 UART, 4 I2C, 3 SPI, 4 CAN BUS, and 2 Camera sensor interface. Designers can use these interfaces to collect or convert the data needed. NUC980 features AES, RSA, SHA and ECC hardware crypto accelerator for CPU offloading. This crypto engine can be applied at data transfer, identification, and key exchange.Nuvoton also provides IoT protocols like HTTP, HTTPS, MQTT, CoAP, openSSL to help customers accomplish a security IoT platform easily. Nuvoton NUC980 adopts MCP technology supporting up to 128 MB DRAM. Developers can design a secure IoT product fast and convenient with the help of the hardware crypto engine. Next, I will introduce related development platforms. NuMaker NUC980 Serial Server Board is suitable for applications like serial server or serial to Ethernet gateways. This develop board includes 2 10/100 Ethernet ports, 8 UART ports, 1 MicroSD Slot, 2 USB ports and 16MB SPI NOR Flash. NuMaker NUC980 USB developer board is suitable for data collection applications. This board includes 1 10/100 Ethernet port, 8 USB ports, 5 UART ports, and 128 MB NAND Flash. NuMaker NUC980 Industrial IOT developer board is suitable for IOT applications. This board includes 1 10/100 Ethernet Port, 2 USB ports, microphone input, earphone output, 128 MB SPI NAND Flash and an Arduino Compatible interface. - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買網址：http://direct.nuvoton.com/arm9-mpus/ 聯絡我們：SalesSupport@nuvoton.com

新唐低功耗8051微控制器 - ML51 系列 產品、應用及開發環境介紹。 ML51 平台的速度高達 24 MHz。並具有 1.8 ~ 5.5V 的寬工作電壓，同時功耗也提供非常低，在正常運行模式下功耗僅需 80 μA / MHz，在休眠模式下功耗更可以低至 0.8 μA；類比部分我們提供 8 組 12 位 ADC、2 組比較器以及 5 階內置參考電壓。另外我們也內建 2 組 PDMA，ESD 部分可以高達 8 kV 以及 EFT 可以高達 4.4 kV，我們還提供許多豐富週邊、像是三路串口以及 2 路 I2C 還有 2 路 SPI。 ML51 系列適合於在各種需要電池的裝置，舉例來說，我們可以讓一個225mAh 的鈕扣電池持續工作 3 年而不需要更換電池。另外我們提供的寬工作電壓可以供電低至 1.8V 也不需要外加 LDO 在 PCB 板、舉例像是 TWS 的無線藍芽耳機或者是獨立式的煙霧感測器都是非常適合 ML51 的產品。 ML51 提供的開發板可以直接與電腦相連，不需要額外的燒錄器。ML51 提供的開發板以及相關的 sample code 都能讓各位快速上手、另外我們新的開發板上面，背面都印有一個短網址、輸入短網址進入網頁後可以在上面找到相關的開發資訊。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買網址： NuMaker-ML51PC/ http://direct.nuvoton.com/numaker-ml51pc NuTiny-ML51EB9AE/ http://direct.nuvoton.com/nutiny-ml51eb9ae 聯絡我們：SalesSupport@nuvoton.com This video is going to show you our latest Low power ML51 series microcontroller. The ML51 platform features high performance and pin-to-pin compatibility with our 32-bit microcontrollers, such as M480, M031, and M261 series . ML51 series supports up to 24MHz operation frequency, and 1.8V to 5.5V operating voltage, it provides four power modes: normal run mode, low power run mode, low power idle mode, and power down mode. In power down mode with multiple wake-up sources. The power consumption in low power idle mode is down to 13 μA and in power down mode it is less than 0.8 μA. When the clock runs at internal RC oscillator can also allow 9600 baud rate for UART communication. ADC supports up to 8 channels of 12-bit ADC, analog comparator and five levels of the internal reference voltage, ML51 provide two channels of PDMA, strong immunity like 8 kV ESD and 4.4 kV EFT.

Voice controlled electronic devices have become a popular trend. The advantage is that electronic devices can be controlled without hands. For this scheme, we use Google TensorFlow as the algorithm development environment of speech recognition for deep learning. Then we implement speech recognition on NuMaker-PFM-M487 platform, and realize an offline and instant speech recognition system by Keyword Spotting. Nuvoton Website: www.nuvoton.com