Consumer
- Smart HMI
-
Re-Timer IC for USB4® Devices
-
HMI Platforms and Graphical Libraries Introduction
-
Wireless Smart Thermostat
- Gaming Lighting and Cooling Fans Control
-
New HMI Platform NuMaker-HMI-MA35D1
- GPS Tracker for Pet
- Soy-milk Maker Driver
-
Bluetooth Toothbrush Reference Design
- CSP MOSFET
- TWS Charging Box
- M031BT dual mode gaming mouse solution
- Four-in-one Smart Electronic Lock
- Advance Headset
- Baby Gear
- DSC / DVC
- DVR
- ELA
- Game Console
- Home Appliance
- Media Box
- Micro Printer
- Security Panel
- Smart Phone payment
- Smoke / CO Detector
- Sound Bar
- Toy
- Video Baby Monitor
- Voice Recognition
- WiFi CAM
- Kitchen Heating Appliance
- Wireless Charging
- Half-bridge Induction Cooker
- Smart Projector
- Laser TV
- 6-claw Robot
- Smart Plug
- USB Car Driving Simulator System
Industrial
- 48V Industrial Fan Motor Driver
- Totem Pole LLC EVB
- ARGB Fan Driver
- New Energy Gateway
- Industrial Weight scale
- Power Measurement
- Power Delivery 3.0 compliant DC Fan
-
MA35D1 HDMI Video Playback
- Digital Power Control
- Industrial Battery Monitoring IC
- NUC980 OpenWrt Graphical Gateway
- DALI Ecosystem - Control Gears and Devices
-
DALI Ecosystem - Application Controller
- High Voltage Fan Driver
-
Low Voltage Fan Driver
- Motor Parameter Identify Tool
-
Totem Pole PFC Reference Board
- Motor Driver
- Electric Scooter
- Air Purifier
- Out-of-band (OOB) Management Solution for Edge Devices
- Edge Computing for License Plate Recognition
- USB Type-C PD 3.0 TCPC and TCPM Solution
-
Battery Management System
- RF-GaN PA Module for 5G Base Station
- Servo Driver Module
- Elevator Call Board
-
Thermostat with Touch Key
- LoRaWAN ECO System
- DALI Digital Lighting Control
- Low Power ML51 Series Electronic Shelf Label
- Interactive Human Machine Interface Solution
- Plug and Play Iindustrial Measurement Development Platform
- IoT Development Platform
- NB-IoT IoT Development Platform
- Industrial Remote Terminal Unit
- Smart Water Meter
- Label Printer
- Face Recognition Attendance Machines
- 2D Bar Code Scanner
- Card Reader
- eBalance
- eBike
- Electricity Meter
- Face Recognition
- Fan / Ceiling Fan
- Fingerprint Identification
- Gas Meter
- Heat Meter
- POS
- QR Code Scanner
- Water Meter
- Smart battery management system
- BLDC Motor Control
- 8x8x8 LED Cube
- Door Access control system
- Elevator Control System
- LED Display
Smart Home Appliances
- TOF Solution
- M467 LVGL Display
- TFT Color Thermostat
- Virtual Reality (VR) Solution
- HDMI2.1 4x2 Matrix Solution
-
TOF sensing solution
-
Cold Chain Data Logger
- Color Display Wi-Fi Thermostat
- Smart Home Central Control utilizing IoT and Color Screen
- Smart Home Appliances with Video Playing Function
- Multi-Cloud Connection Platform
- TFT Thermostat
- Wireless Power Supply and Data Transfer Solution
- Machine Learning
- Intelligent Power Station
- PM2.5 Module
- OLED Display - GIF Format Decode (LZW) Supported
- Smart Toilet
IoT Security
- Matter for IT Monitor with Security
- M2354 for RTOS + PSA TF-M
- Cold Wallet Security
- CCTV VPN Security Module
- IoT Cloud-Ready Wireless Module
- Smart Sound Box
- IoT Secure Connection Solutions-1
- IoT Secure Connection Solutions-2
- Smart Meter for AMI 2.0
- Arm® Pelion Secure IoT Device Management Supported by M2351
- Fingerprint Secure IoT Door Lock
- USB FIDO Key for Identity Security
Audio / Video
- NSP2340T Voice Assistance with Touch Solution
- Smart Office UC Headset Solution
- Smart Office UC Speakerphone Solution
- NSP series voice assistance solution
- Noise reduction and echo cancellation solution
- Demo board template - ISD2361
- Bluetooth Audio
- Docking of iPhone / Android
- TV Audio
- WiFi A / V Streaming
- Wireless Microphone
- Wireless Speaker
Wireless Power Supply and Data Transfer Solution
-
Watch time - 16:32介紹MCU Security Standard 或 Certification 的方法。認識這些安全認證的標準，將有助於決定產品所需具備的安全功能。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com -
Application Learning Watch time - 3:11Briefly explain the basic functions and security features of Nuvoton's M235x IoT Security MCU series products, and actually demonstrate the online streaming music playback function provided by the Google Cast Wireless Speaker based on the M235x Series and the Youtube APP on the mobile phone. #en #Learning #Intermediate #application #M2351 #M2354 #GoogleCast #WirelessSpeaker #Play-Fi #EmbeddedWorld2022 - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com -
Watch time - 4:15Take Nuvoton NuMaker-IIoT-NUC980 running Linux as the platform and learn how to develop various functions. Watch this video, you will learn how to use cellular, such as LTE or NB-IoT, to connect to network on NuMaker-IIoT-NUC980 board. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/numaker-nuc980-iiot Contact us: SalesSupport@nuvoton.com -
Training Tool Learning Watch time - 2:11. Explain how to use ICP Programming Tool to update Nu-Link2-Pro's firmware. 2. Explain how to update the Nu-Link2-Pro's firmware by pressing the trigger button before power is on. Then the power is on and dragging files to the Nu-Link2 drive. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning -
Training Tool Learning Watch time - 3:19This video introduces how to download and install Arm Keil, and its content includes how to use Nuvoton's product serial number to apply for an Arm Keil product serial number and how to receive a product serial number that can be used in the activation step. Help you to install and use Arm Keil easily, and through Nuvoton's product serial number, free (M0 series) or half price (M23, M4 series) use Arm Keil product serial number. #Tool #Training #Learning #Intermediate #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/numaker-m251sd Contact us: SalesSupport@nuvoton.com -
Training Tool Learning Watch time - 4:14The video will introduce you the NuMicro™ Family M251/M252 Series BSP, includes how to download the BSP and introduction of each sample codes and folders. And help you use the template to develop your first M251/M252 program. #Tool #Training #Learning #Intermediate #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/numaker-m251sd Contact us: SalesSupport@nuvoton.com -
Training Tool Learning Watch time - 0:41The new-generation Nu-Link2-Pro has debugging functions, ETM tracking, serial data analysis, and USB-to-serial communication bridge. The fast programming speed and convenient firmware upgrade of ISP products allow customers to process more quickly and conveniently at every stage from development to mass production, increasing the development and mass production efficiency. It is an indispensable weapon for engineers' product development and mass production upgrade. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning -
Training Tool Learning Watch time - 4:361. Show how Nu-Link2-Pro can use ICP Programming Tool on PC to program target chips online 2. Show how Nu-Link2-Pro drag and drop files to the NuMicro MCU drive to program the target chip online - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning -
Product Learning Watch time - 5:0Introduce the waterproof and noise immunity of ML56 touch key. Hello! Everyone! I am Nuvoton FAE Tim. Today, I will show you the waterproof and noise immunity of ML56 touch key. First introduce the waterproof and noise immunity of ML56 touch key. Good waterproof function, support finger touch with 2 mm depth water droplet. IEC 61000-4-6 conducted noise immunity (CNI) with 10 Vrms noise voltage. Next, we will explain the related parameter settings of the ML56 touch key, and first explain the touch sensitivity. #Pulse Width (Touch key sensing pulse width time control) Touch key sensitivity can be adjusted by setting Pulse Width properly, shorter Pulse Width setting comes with poor sensitivity and less power-consumption, vice versa. Then explain the stability of touch performance, Part 1. #Times (Touch key sensing times control) Touch key raw data stability can be adjusted by setting Times properly, shorter Times setting comes with poor raw data stability and less power-consumption, vice versa. Stability of touch performance, Part 2. #IIR (IIR filter) IIR filter can control the ratio of current raw data and previous one. User can enable IIR Filter to be against noise. It will increase the touch response time when enables IIR Filter. Stability of touch performance, Part 3. #Debounce (Touch key debounce) Touch key stability can be adjusted by setting Debounce properly, the debounce times for touch key entry (on) and release (off) detection, shorter Debounce setting comes with faster touch response time, vice versa. Stability of touch performance, Part 4. #Trace Baseline (Baseline is generated by “Calibration”) Touch key auto environment compensation is an algorithm that baseline tracking each touch key automatically at power-up and keeps compensating environment variation affects touch key performance during runtime. Based on the above parameter description, the following introduces the waterproof and noise immunity parameter settings. The first is waterproof parameter setting. Good waterproof function, support finger touch with 2 mm depth water droplet. Touch key system parameters are shown in the table Pulse Width = 500 ns Times = 128 Next is the noise immunity parameter setting IEC 61000-4-6 conducted noise immunity (CNI) with 10 Vrms noise voltage. Touch key system parameters are shown in the table. Pulse Width = 2 us Times = 128 IIR New = 6, Old = 2 Debounce Entry = 1, Release = 1 Then we use the ML56 NuMaker Board to show you the waterproof function of the touch key. Dip the finger in water first, and then touch the touch key. Repeat the above actions, we can see that the touch key still works normally and is not affected. Finally, we use the ML56 NuMaker Board to show you the noise immunity ability of the touch key. Turn on the walkie-talkie first, and then interfere with the touch key at close range, we can see that the touch key still operate normally and is not affected. That's all for today's video, thank you everyone! If you have any questions, please contact us. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.comon.com #Product #Learning #Basic #en#Basic #ML56 #NuMicro #Pulse Width (Touch key sensing pulse width time control) #IIR (IIR filter) #Product #en #Trace Baseline (Baseline is generated by “Calibration”) #Times (Touch key sensing times control) #8051 #Learning #Debounce (Touch key debounce) #Nuvoton #touch key IC #noise immunity #low power #ML54 #waterproof #MCU #ML51 -
Training Tool Learning Watch time - 3:24Hello everyone I am Chris, the Field Application Engineer from Nuvoton Technology. Today I will introduce the programming and debugging tool, called NuLink-Gang, and NuLink2-Pro. And I will show you in what kind of situation you can utilize the tools. During system development, Nuvoton provides three IDE interfaces: KEIL, IAR, and NuEclipse for user to develop source code. When programming the Chip, Nuvoton provides ICP programming Tool in PC and the debugger Nu-Link2-Pro for users to perform debugging and programming function. User who uses all of the Nuvoton Nu-Maker boards series can develop through the Nu-Link2-Me debugger and programmer; it’s attached to the board. During the mass-production stage, there are 2 modes for programming the target chip. One is online programming and the other is offline programming. At first, in online programming mode, user can use ICP programming Tool and a Nu-Link2-Pro to program a target chip. Besides, if it needs to program several chips at one times, the Nu-Link Command Tool supports program multiple develop board by several Nu-Link2-Pro. Nu-Link2-Pro also supports drag-and-drop Flash programming. User can intuitively complete the programming action. Nu-Link2-Pro In offline programming mode, user can pre-store the programming file in SPI flash, USB flash drive, or SD card. When user wants to program the target chip, pressing the programming button on Nu-Link2-Pro to complete the programming action. If it needs a large number of ICs to be programming, it recommends using the Nu-Link-Gang programmer. Nu-Link-Gang programmer can perform offline programming on four different chips at a time, significantly increasing the programming efficiency. Besides, Nu-Link-Gang programmer can also use the control bus to connect with an automatic programming machine for automatic programming. In the system upgrade, Nu-Link2-Pro also provides five standard communication interfaces such as SPI, I2C, UART, RS485, and CAN for transmission, which is convenient for users to upgrade the system. That’s all for the introduction of Nuvoton’s programming and debugging tool, NuLink-Gang, and NuLink2-Pro. Thank you for watching it. If you want to know more details, please contact us! Thank you. #Tool #Training #Learning #Intermediate #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/numaker-m251sd Contact us: SalesSupport@nuvoton.com -
Training Tool Learning Watch time - 4:26Hello everyone, I am Chris, the field application engineer from Nuvoton Technology. Today I will introduce the power modes of the M251/M252 series microcontroller. The M251/M252 series has multiple power modes. The differentiation is based on power consumption, wake-up time, the operable CPU, and peripherals. In normal mode, the CPU is running normally. In Idle mode, only the CPU clock is disabled while other peripherals work as usual. Normal mode and idle mode can be divided into high-efficiency high-speed PL0 mode and low-power low-speed PL3 mode according to CPU operating speed. We should note that in the low-speed PL3 mode, only the clock source of the CPU and peripherals is 32.768 or 38.4 kHz can run. In power-down mode, there are three types according to power consumption. The first is NPD (Normal Power Down Mode). The CPU and high-speed peripherals stop running, and only the low-speed peripherals can work normally. The second is FWPD (Fast Wake Up Power Down Mode), which is the fastest wake-up of the three power-down modes but consumes more power. The third is DPD (Deep Power Down Mode), which consumes the lowest power among the three power-down modes, but the data in the RAM cannot be retained, and the wake-up speed is the slowest. Specific peripherals or pins can only activate the wake-up. For power consumption and wake-up time, we list the corresponding data. Users can choose the most suitable power mode according to the required power consumption and wake-up time. We need to note that FWPD mode will consume more power in the power-down mode because this mode wakes up the fastest. The DPD mode is the least power consumption, but the longest wake-up time.， Also, normal mode is a normal working mode, so there is no need to wake up. The time unit of the idle mode is different from the power-down mode, which is five cycles. The length of a cycle is determined according to the operating frequency used by the system. In the related resources section, we provide application notes for power management, which have more detailed operations and descriptions. If you want to know more, please download it from the URL in the video. There are also various power mode entry and wake-up methods in the BSP package; you can also refer to and use it. That’s all for the power modes introduction. Thank you for watching it. Please subscribe to our channel for more video resources. If you want to know more information, please contact us. #Tool #Training #Learning #Intermediate #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/numaker-m251sd Contact us: SalesSupport@nuvoton.com -
Product Learning Watch time - 9:3Nuvoton announced the latest ML51/ML54/ML56 microcontroller, built-in capacitive touch sensing, LCD driver highly integrated low power platform. Based on 1T 8051 core, running up to 24MHz, the power consumption in normal run mode is 80uA/MHz, lower than 1uA in power down mode the power consumption while power down with LCD on is lower than 20uA. 0:00 intro 0:37 NuMicro 8051 Microcontroller 1:38 ML51/ML54/ML56 Product Portfolio 2:18 ML51/ML54/ML56 Features 3:27 Broad Scalability 4:05 Provide 4 Different Power Modes 4:44 LCD Driver Feature 5:52 Touch Key Features 7:05 Target Applications #Product #Learning #Basic #en #ML51 #ML54 #ML56 #8051 #LowPower #LCD-Driver #HumanMachineInterface #HMI #TouchKey-IC #HomeAppliance #EmbeddedWorld2022 - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.com