This video will guide users to quickly start developing Nuvoton N9H30 series microcontroller in a non-OS environment, and will demonstrate a GUI design by SEGGER emWin AppWizard tool. This video also shows how to enter the debug mode with J-Link and deploy the AppWizard project to the NuMaker-HMI-N9H30 evaluation board by NuWriter. #emWinAppWizard #MPU #N9H #N9H30 #NonOS #HMI #GUIdesign #QuickStart #NuWriter #JLink #Debug #Basic #Training #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

本影片將引導使用者快速建立 N9H30 non-OS 開發環境，並使用 SEGGER emWin AppWizard 工具進行 GUI 設計。同時也會介紹如何使用 J-Link 進入 Debug mode，且透過 NuWriter 將 AppWizard 專案部署到 NuMaker-HMI-N9H30 開發板執行。 #emWinAppWizard #MPU #N9H #N9H30 #Non-OS #HMI #GUIdesign #QuickStart #NuWriter #J-Link #Debug #Basic #Training #Learning #zh-Hant - 更多產品資訊，請至新唐科技網站 https://www.nuvoton.com/?utm_source=youtube&utm_medium=video&utm_campaign=all 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

嗨，大家好我是新唐產品應用工程師 Aaron 今天為各位介紹的是新唐安全微控制開發平台 - NuMaker-IoT-M2354 NuMaker-IoT-M2354 開發板上帶有新唐 - NuMicro M2354 微控制器，採用封裝為 LQFP128。在正式介紹開發平台前，先快速帶領大家了解 NuMicro M2354 的各項特色，M2354 是基於 Arm® Cortex®-M23，新唐最新一代的安全物聯網微控制器，除了 CPU 本身具備的 TrustZone 安全防護功能，讓您在單一 CPU 內實現安全及非安全區的管理。全系列皆帶有 1 MB Flash, 256 KB 的 SRAM，讓使用者更能專注於軟體的開發而不需擔心資源不足的問題。這點在物聯網裝置常需搭配 OS 做開發來說來說，尤為重要。 M2354 提供豐富的周邊，除了基本的 UART, I²C, SPI，更支援 Quad SPI , USB FS OTG, SD Host 以及 CAN BUS，而為了便於物聯網裝置常有的數據顯示需求，M2354 支援了 COM/SEG LCD，多達 320 點的 LCD 驅動器，能夠滿足各種智慧家庭及物聯網應用。 除了豐富周邊，M2354 最大特色就是支援了許多安全功能：Secure boot 提供根信根機制，能確保運行軟體的合法法及完整性，RSA ECC AES SHA 各種加密算法能加速聯網時，所需要的認證及資料加密需求，搭配 key store的使用能將加解密的過程提升到更高的安全層次。 而為了能符合 PSA CertifiedTM Level 3 (物聯網認證標準) 的安全需求，M2354 針對非侵式的攻擊手法也提供了對應的安全防護措施，防止如側信道及故障故入等攻擊。 那緊接著介紹我們今天的主題，NuMaker-IoT-M2354 基於上述的特色及安全規劃，我們認為 M2354 非常適合作為物聯網裝置的開發平台，因此製作了一片開發板，希望能加速使用者孰悉 M2354 的開發及應用。NuMaker-IoT-M2354 搭載 Bosch BME680 環境感測器，能偵測 VOC (揮發性有機物) 氣壓、溫濕度等指數，藉由 MBED OS 開發平台提供的完整連雲範例以及 M2354 支援的各種加密加速器，可實時且安全的將數據送往雲端 (如 Pelion，AWS)。開發者也可同步將數據顯示在 LCD 屏上，新唐BSP 提供完整屏的函示庫做為快速開發使用。 NuMaker-IoT-M2354 平台提供 Wi-Fi 及 LoRa 兩種無線模組，使用者可根據資料傳遞量及功耗表現等需求來決定想採用的無線連接方式，其中需注意的是若使用 LoRa 模組進行連雲開發，則還須搭配新唐推出的 NUC980 LoRa Gateway。NuMaker-IoT-M2354 的 LoRa 模組共支援兩種頻段，分別為 915MHz/433MHz，使用者可在依據開發需求來做選購。 除了提供豐富周邊，為了讓使用者能有更為彈性的開發介面，NuMaker-IoT-M2354 同時支援了 Arduino UNO 及 mikroBUS 兩種擴充應用，若使用者有 NB-IoT 或者 4G-LTE 等連線開發需求，新唐同時也提供這兩種模組的 Arduino UNO 開發板可以與 NuMaker-IoT-M2354 做搭配使用 (Quectel-BG96A for NB-IoT/ Quectel-EC21A for 4G-LTE)。 除此之外，板子上也提供多種電源供應介面及耗電量測介面以及 Nu-link2-Me 燒錄偵錯開發工具，能支援 BSP 透過 Keil IAR GCC 進行開發，也支援 Mbed IDE 開發系統。 以上就是今天為大家所做的介紹，若有任何問題都歡迎與我們聯繫，謝謝。 #zh-Hant #Learning #Intermediate #application - 相關開發工具及購賣連結： ● M2354 Series https://www.nuvoton.com/products/microcontrollers/arm-cortex-m23-mcus/m2354-series/ ● NuMaker-LoRa-NUC980 https://www.nuvoton.com/products/iot-solution/lora-platform/index.html ● NuMaker-M2354 https://direct.nuvoton.com/tw/numaker-m2354 ● Quectel-BG96A https://direct.nuvoton.com/tw/quectel-bg96a ● Quectel-EC21A https://direct.nuvoton.com/tw/quectel-ec21a #zh-Hant #Learning #Basic #Application #Product #Nuvoton #NuMicro #新唐科技 #MCU #微控制器 #M2354 #TrustZone #安全 #物聯網 #NuMaker-IoT-M2354 #IoT #Arm®Cortex®-M23 #M23 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們： SalesSupport@nuvoton.com

新唐 NuMicro M031BT 雙模藍牙低功耗 5.0 (Bluetooth Low Energy, BLE5.0) 提供了 BLE UART 透傳的展示，並實際操作如何使用 AT 命令模式來作設定與使用資料傳輸模式來收發資料。 【KEIL MDK Nuvoton edition M0/M23(Free License)】 https://www2.keil.com/nuvoton/M0-M23 【Nu-Link_Keil_Driver】 https://www.nuvoton.com/resource-download.jsp?tp_GUID=SW1120200221180521 【M031 BLE AT Command User Guide】 M031_Series_BSP_CMSIS_V3.xx.xxx\SampleCode\NuMaker-M03xBT_XXXXXX\BLE\Doc\M031 BLE AT Command User Guide.pdf 【Related sample codes in the BSP (Board Support Package)】 BSP_ Library\M031_Series_BSP_CMSIS_V3.xx.xxx\SampleCode\NuMaker-M03xBT_xxxxxx\BLE\Demo ATCMD 【App】 App Store (Apple devices): https://apps.apple.com/tw/app/nuvotonble/id1514073524 Google Play Store (Android devices): https://play.google.com/store/apps/details?id=com.nuvoton.nuble 大家好，我是新唐的工程師 Oliver，今天爲大家介紹 M031BT 的 BLE UART 透傳範例程式的展示，另外也會簡單介紹一下 M031BT 的特點。 M031BT 的特點是它是一個有豐富周邊且帶有 BLE 5.0 無線傳輸的 MCU，在系統方面 CPU 可以運行到 48MHz，Flash 最多可達 128 KB，SRAM 最多可達 16KB，封裝是 QFN 5x5mm，在 48 pin 的 IC 中算是非常小的，在類比周邊部分 ADC 是 12-bit 且采樣速度可以高達 2 MSPS，另外還有 2 組比較器；數位周邊也非常的豐富，像是UART有3組、I2C有2組、PWM有12通道，且PWM解析度可以高達2倍的系統頻率96 MHz、Timer有4個；在無線傳輸部分支援BLE 5.0或2.4G私有協議，可調整的發射功率可達+8 dBm，接收靈敏度可達 -94 dBm 新唐對於藍牙的開發支援了透傳/HOGP/heatbeat三種profile並且有OTA功能，此外central mode/peripheral mode的切換功能，有更多元場景應用的可能性，對於不熟悉藍牙開發的客戶我們也支援AT command協助客戶可以快速開發，透過新唐所推出的M031BT您可以應用在個人醫療儀器、個人保健照護、量測儀器或是智慧門鎖等應用 接下來介紹今天demo的BLE UART透傳，在demo的系統中會有個HOST透過UART傳資料給M031BT，M031BT再經由BLE將資料傳送給手機，或由手機發資料透過BLE傳送到M031BT，再由M031BT的UART傳給HOST，再這個dome中分爲兩種模式一種是AT Command，是用來對M031BT做基本設定，另一種模式是資料傳輸模式也就是透傳模式，M031BT會將UART收到的資料轉爲BLE送出去，或將BLE收到的資料轉爲UART再給HOST，這兩種模式的切換是透過HOST控制高低准位並且輸入到M031BT的GPIO來切換 在開始測試之前我們需要先準備測試環境，我們使用NuMaker-M031BTYE一台電腦當作HOST，NuMaker-M031BTYE上的Nu-Link2-Me當作USB轉UART的橋接器，M031BT的UART脚位PA0/PA1會經由VCOM switch連接到Nu-Link2-Me 的UART引脚，我們只要把VCOM指撥開關的Pin1/Pin2撥到ON就可以連接 另外M031BT的模式控制脚位PB0若連接到VDD是AT command 模式，若連接到GND是資料傳輸模式，模式控制脚位預設內部上拉至VDD，所以預設是AT command 模式 現在我們將USB線接上NuMaker與電腦後，開啓裝置管理員確認com port是否有連接上，確認是COM3就可以關掉了，接著電腦上需要安裝任一種的串列通訊軟體，影片中我們使用Putty當作範例，安裝完Putty之後，開啓Putty選擇Serial，輸入剛剛確認的COM3還有115200的波特率，按下OPEN 再來我們需要將AT Command的固件下載到M031BT，我們開啓ATCMD這個範例的專案，按下編譯，編譯完之後按下載等待下載完成，下載完成後我們可以看到Putty的視窗中已經有打印出一些信息了，代表燒錄成功 再來是如果安卓裝置要在Google Play Store下載App若是iOS的話要在App Store下載後安裝，影片中以安卓來當作範例，開啓Paly Store並輸入Nuvoton BLE看到後點選安裝，等安裝完成後初步的環境設置就算完成了 接著來看看ATCMD支援的命令有哪些，這是AT command 的列表，主要都是用來查看M031BT的參數或是設定M031BT的參數 例如輸入AT是測試命令，查看M031BT在AT command模式是否正常; 輸入AT+HELP? 是查看支援那些命令; 輸入AT+UART是察看UART波特率是多少，預設是115200，也可以設定波特率,目前支援五種不同的波特率; AT+NAME可以看裝置名稱或修改裝置名稱； AT+ADVINT可以查看目前的廣告間隔時間與設定廣告間隔時間； AT+ADVEN可以開啓廣告，讓手機可以搜尋的到，要注意的是預設沒有開的AT+TXPWR可以設定輸發射功率，目前有三種段數可設定，分別是0/4/8 dBm; AT+SLEEP可以讓M031BT沒發送資料時候進入睡眠模式，節省功耗 其他詳細說明可以參考這份表格或M031 BLE AT Command User Guide這份文件，這個文件在BSP裏面可以找到 接下來我們來實際操作，這一頁說明ATCMD這個範例程式的預設參數設定，像是波特率是115200，發射功率是+8 dBm，大家可以參考一下。 我們先前開啓過裝置管理員確認設定是COM3還有波特率是115200，接著NuMaker-M031BTYE的reset 按鍵，就可以看到M031BT AT Command的字顯示在PuTTY的視窗中，那預設模式脚位的PB0預設是上拉到VDD，所以預設是AT command 模式 接著使用鍵盤輸入AT按下enter按鍵，若出現OK代表AT command 模式是正常，即可輸入其他指令 若要查看支援那些指令，可以輸入AT+HELP?再按下enter鍵，就會出現全部支援的指令有哪些 若要看現在的波特率設定輸入AT+UART? 再按下enter鍵，就可以知道UART目前的波特率 廣告的間隔時間可以查看也可以修改，輸入AT+ADVINT? 就可以得到目前的廣告間隔時間，看到目前是160，這個數值每個單位是0.625us，也就是100ms，間隔時間的設定會影響到平均的功耗，這時間也可以修改，間隔時間越長平均功耗越低，不過也是要看應用需要多少時間 再來我們輸入AT+ADVINT=320可以看到回復OK，代表時間已經改爲200ms，我們可以再次輸入AT+ADVINT?得到間隔時間是320，確認修改成功 輸入AT+ADVEN可以開啓廣告讓手機可以搜尋的到，預設並沒有開啓，所以輸入開啓的指令 輸入AT+ADDR?可以查詢BLE設備位址 再來我們可以輸入AT+NAME?來查詢BLE設備的名稱，我們可以看到裝置名稱是NVT-M031BT， 打開手機的APP來搜尋看看，搜尋到的就是NVT-M031BT 那也可以修改BLE設備的名稱，只要依據前面的表格下指令就可以 再來是數據傳輸模式演示，也就是透傳模式，我們首先再AT command模式下輸入AT+ADVEN啓用廣告可讓手機搜尋的到，再來開啓NuBLE掃描並連接到NVT-M031BT，接著我們必須要手動將模式控制引脚PB0如畫面上的連接到GND，就可以切換成爲數據傳輸模式也就是透傳模式 再來我們在文字輸入欄位中輸入字符串，然後點擊SEND按鍵，那麽手機上輸入的資料就會透過BLE傳送資料到M031BT，M031BT再將收到的資料經由UART透過Nu-Link2-Me傳送到PC的終端窗口中 剛剛已經演示過兩種模式的使用方式，在相關資源部分 基本的開發環境KEIL我們提供的免費許可證，依照連結網頁內的步驟來做只要使用新唐的M0/M23 MCU就可以免費使用，另外Nu-Link的driver也提供連結下載 另外關于影片中的M031 BLE AT Command用戶指南已經放入BSP內，裏面有更詳細的操作與說明，BSP可從官網下載，APP部分也附上連結，方便大家使用 以上是這次的教學影片，感謝您的收看。歡迎訂閱我們的頻道。 如果您想知道更多資訊歡迎聯絡我們！ #zh-Hant #Learning #Basic #Application - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

● Intro ● Software preparation ● GUI design ● Animation & Interaction ● Build code ● SPIM function ● Demo This video demonstrates how to use the Nuvoton M467 HMI evaluation board(NuMaker-HMI-M467) with the SEGGER emWin AppWizard tool to rapidly create an electric bicycle dashboard interface. The video covers various aspects, including creating interaction and design by combining different objects, exporting the code, code explanations, compiling the code, and showcasing the results of the emWin AppWizard E-bike example program. This step-by-step guide enables users to easily operate the Nuvoton-HMI-M467 and emWin AppWizard tool. Example code download link: http://forum.nuvoton.com/viewtopic.php?f=19&t=11186&sid=1f4715f5205c1fb45b47aa8ad301cf2c #NuMicro #Nuvoton #Basic #Application #Tool #Training #Learning #HMI #M4 #emWin #AppWizard #GUI #Ebike #dashboard #新唐科技 #MCU #Microcontroller #MCU #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

NuMaker-Volcano 是新唐 NuMicro® M0A21/M0A23 微控制器的開發板。這款開發板以僅有 2.5x5 毫米的小巧尺寸為特點，比硬幣稍大，同時搭載功能強大的 M0A23 微控制器，並且所有 28 個腳位均可在電路板上連接使用。此外，它還具有用於編程和調試器目的的 Nu-Link2-Me。NuMaker-Volcano 可作為工業和車用控制應用專案評估、開發、驗證以及功耗監控的平台。 #AEC-Q100 #125度 #火神板 #微控制器 #車用 #Basic #Product #Learning #zh-Hant #Nuvoton #NuMicro #MCU #新唐科技 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

NuMaker-Volcano is the development board for Nuvoton NuMicro® M0A21/M0A23 microcontrollers. This board stands out with its compact size of only 2.5x5 millimeters, slightly larger than a coin. It comes equipped with the powerful M0A23 microcontroller, and all 28 pins are accessible for circuit board connections. Additionally, it features a Nu-Link2-Me for programming and debugger purposes. NuMaker-Volcano serves as a versatile platform for evaluating, developing, and validating industrial and automotive applications. #AEC-Q100 #125degree #Volcano #Microcontroller #Automotive #MCU #Nuvoton #NuMicro #M0A23 #Basic #Product #learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Hi everyone, I'm Aaron. The FAE of Nuvoton technology. Today, I'm glad to show you the Nuvoton secure development board, NuMaker-IoT-M2354. The NuMaker-IoT-M2354 is an IoT evaluation board powered by the NuMicro® M2354 series. Before the introduction of NuMaker-IoT-M2354, I will take you to a quick understanding of NuMicro M2354. The M2354 is the latest NuMicro IoT series product which is based on Arm® Cortex®-M23 CPU core technology. The TrustZone® technology based on Armv8-M architecture is a CPU system-wide approach to microcontroller security. The M2354 series carry 1 Mbytes embedded Flash memory and 256 Kbytes SRAM. It's essential for IoT devices with real-time OS requirements. And you can focus on software development without warring about the flash and SRAM resource. The M2354 series is equipped with plenty of peripherals. In addition to providing UART I2C SPI Timer, it also supports the Quad SPI, USB FS OTG, and CAN BUS. Furthermore, to satisfy the IoT device's display development, the M2354 series built-in 8 COM x 40 SEG LCD controller drives up to 320 dots to meet various smart home and IoT appliances. In addition to providing many peripherals, the critical feature of M2354 is supporting many security functions. The secure boot ensures the legality and integrity of the running firmware. The hardware crypto with RSA/ECC/AES/SHA accelerators can help the device connect to the cloud fast and safely. Moreover, the M2354 is equipped with Key Store, which could be used with crypto accelerators to enhance the chip security level. To comply with Arm PSA CertifiedTM Level 3, the M2354 has implemented some countermeasures to protect against non-invasive attacks like side-channel attacks or fault injection attacks. The NuMaker-IoT-M2354 equips a Bosch environmental sensor, BME680, which contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. After getting data from the sensor, users can send data to the cloud, such as Pelion or AWS, by Mbed OS. Because M2354 supports hardware crypto, the data can be sent more efficiently and safely. The data could be shown on the LCD panel by the LCD library provided in the M2354 BSP. The NuMaker-IoT-M2354 contains a Wi-Fi module and LoRa module for wireless applications. Depending on the data throughput and power consumption, you can choose one of them for your IoT applications. In the LoRa network, each node is not connected but must be connected to the gateway before being linked back to the central host, or data can be transmitted to another node through the central host. For example, if choosing the LoRa module for the cloud development, you could use NUC980 LoRa Gateway for your gateway platform. The NuMaker-IoT-M2354 supports the radio frequency band of the LoRa module on 915MHz and 433MHz, depending on the customer's requirement. In addition to providing the rich peripheral, the NuMaker-IoT-M2354 also equips the Arduino UNO connector and mikroBUS™ connector for flexible applications. Suppose you want to develop other wireless connecting features like 4G-LTE or NB-IoT. In that case, the Nuvoton also provides a UNO-to-PCI adapter board to supports Quectel EC21 4G/LTE and Quectel BG96 NB-IoT modules. The NuMaker-IoT-M2354 also provides multiple power supplies by external power connectors and an ammeter connector that can instantly measure power consumption. In addition, the Nu-link2-Me on the board is a debugger and programmer supporting development on Keil, IAR, GCC, and Mbed IDE. #en #Learning #Basic #Application #Product - Online Purchase Development Tools： ● M2354 Series https://www.nuvoton.com/products/microcontrollers/arm-cortex-m23-mcus/m2354-series/index.html ● NuMaker-LoRa-NUC980 https://www.nuvoton.com/products/iot-solution/lora-platform/ ● NuMaker-M2354 https://direct.nuvoton.com/tw/numaker-m2354 ● Quectel-BG96A https://direct.nuvoton.com/en/quectel-bg96a ● Quectel-EC21A https://direct.nuvoton.com/en/quectel-ec21a - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

The video introduces Nuvoton's MPU N9H30's development set-up for Linux and Non-OS, taking NuMaker-emWin-RDK-N9H30 for example. Starting from the EVB introduction to BSP and related software downloads. - User manuals and related resource can be downloaded https://www.nuvoton.com/products/gui-solution/gui-reference-design/numaker-emwin-rdk-n9h30/ First, we introduce how to program Linux OS to the N9H30 evaluation board Find the N9H30 evaluation board resource that we used on Nuvoton’s Github and download the VMware Image https://github.com/OpenNuvoton/MPU-Family VMware application can be downloaded from the VMware website https://www.vmware.com/tw/products/workstation-player/workstation-player-evaluation.html First, open the VMware Find the ubuntu_NUC970_980_Linux folder we downloaded Choose Ubuntu 64-bit_nuvoton.vmx Choose Play virtual machine The password is “user” It will take a while to open this application for the first time Open the terminal when the system is ready Enter NUC970_Buildroot-master folder After entering the folder, we need to update the Buildroot tool Enter the command as shown below “git reset –hard” “git pull” After updating, enter the dl folder Remove the original Linux kernel and u-boot Enter the command as shown below “sudo rm -rf linux-master.tar.gz uboot-master.tar.gz” After entering, enter the password “user” Leave the dl folder and enter the Buildroot folder Enter the “make clean” command You don’t need to do these steps unless updating Buildroot tools Now, we set up the evaluation board configuration Enter configs folder to search evaluation board name Back to buildroot after searching Enter “make nuvoton_n9h30_emwin_defconfig” to generate configuration file After finishing these step, enter “make” to compile It will take about three hours to compile After compiling, copy the two files below to windows “/NUC970_Buildroot-master/output/images/uImage” “/NUC970_Buildroot-master/output/build/uboot-master/u-boot.bin” Create text file ”env-nor.txt” The content is shown below: baudrate=115200 bootdelay=1 stderr=serial stdin=serial stdout=serial setspi=sf probe 0 50000000 loadkernel=sf read 0x7fc0 0x200000 0x600000 bootcmd=run setspi;run loadkernel;bootm 0x7fc0 bootargs=noinitrd root=/dev/mtdblock2 rw rootfstype=jffs2 console=ttyS0 rdinit=/sbin/init mem=32M mtdparts=m25p80:0x200000@0x0(u-boot),0x600000@0x200000(kernel),-(user) ignore_loglevel Then, we need to install NuWriter and related file The NuWriter is a programming tool provided by Nuvoton. The NuWriter application and firmware code are open-sourced, and users can add new features or develop new user interfaces per user’s application NuWriter: https://github.com/OpenNuvoton/MPU-Family Open “NUC970_NuWriter-master” Enter Driver folder and install “WinUSB4NuVCOM.exe” Enter /Nuwriter/Release and execute NuWriter Choose IC number based on the evaluation board We need to program Image to SPI Flash, so we choose SPI Here we need to turn the all Power-On Setting to ON Push Reset button Return to NuWriter to check the green light and the connection If it is not connecting, click Re-Connect to reconnect After confirm the connection, start to program Image Program the three files to particular address u-boot.bin program to 0xe00000 env.nor.txt program to 0x80000 uImage program to 0x200000 After programming, turn the Power-On Setting to off Push the Reset button Evaluation board can start to boot from SPI-NOR After booting, we need to find the rcS demo application under/etc/init.d Enter “chmod 777 rcS” to modify the application Now, you can see the application on the evaluation board panel Here, we finish compiling and programming The next topic is how to compile and program Non-OS code First, download MDK-Arm from the link below https://www.keil.com/download/product/ Download the Non-OS BSP provided by Nuvoton https://github.com/OpenNuvoton/MPU-Family The BSP includes Keil environment set up user manual Use Keil need to purchase the related license After downloading, Open Keil uVision Click the File on the upper left and choose Open Go to the BSP that we downloaded choose BSP, SampleCode, emWin_SimpleDemo, KEIL and emWin_SimpleDemo.uvproj Click Option for Target Click Device and choose NuMicro ARM9 Database and N9H_series After setting up, click Rebuild, and it will generate a sample code application which is a binary file Open the NuWriter and connect it to the evaluation board Choose SPI and search the application we built \N9H30_emWin_Non-OS_BSP_v1.04.000\N9H30_emWin_Non-OS_BSP_v1.04.000\BSP\SampleCode\emWin_SimpleDemo\KEIL\obj\emWin_SimpleDemo_FW070TFT_24BPP.bin Follow the setting and program the file to 0x0 After programming, turn the Power-On Setting to boot from SPI You can see the demo application on the evaluation #Basic #Product #Tool #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Always want to knock on the door and get in the MCU world? Here is a perfect entrance for you! To let anyone interested in MCU familiar with Nuvoton’s development environment, we provide you a beginner course. Thus, you can have not only a whole picture of Nuvoton’s Development platform, including EVB, debugger/programmer, IDE, BSP, and software, but can also implement a very first project in this workshop. Nuvoton has a user-friendly environment even for beginners, so don’t hesitate to join us. Let Novoton’s rookie lead your way! Before we get started, please follow the steps before the workshop. 1. Terminal Emulator Download PuTTY：An open-source SSH and telnet client for the Windows platform. Download – "putty.exe" https://www.putty.org/ 2. IDE Installation - KEIL MDK Nuvoton edition M0 / M23 ＞Enter Contact Information ＞Download and Install ＞Get and Add License Download link：https://www2.keil.com/nuvoton/M0-M23 Tutorial：https://youtu.be/dzp9sAm4vmg - Agenda: • NuMicro® Ecosystem • Nuvoton Golden 3 Steps • NuMaker Board Unboxing & Introduction • Practice for Very Beginner - Get Started by Quick Start • Summary - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com #Application #Tool #Training #Webinar #General #en

展示 Nu-Link2-Pro 如何在 PC 上搭配 ICP Programming Tool 將 ISP Bootloader 燒錄至 LDROM，再使用 Nu-Link2-Pro 的 Bridge I2C 介面搭配 ISP Programming Tool 來升級目標晶片的韌體。 #zh-Hant #Tool #Training #Intermediate #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/nu-link2-pro 聯絡我們：SalesSupport@nuvoton.com

Show how Nu-Link2-Pro uses ICP Programming Tool on PC to program ISP Bootloader to LDROM, and then use Nu-Link2-Pro Bridge I2C interface with ISP Programming Tool to upgrade the firmware of the target chip. #en #Tool #Training #Intermediate #Learning - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com