FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
- M451 Base Series(118)
- M451M Series(117)
- M452 USB Series(130)
- M4521 USB Series(1)
- M453 CAN Series(128)
- M463 CAN FD/USB HS Series(1)
- M467 Ethernet/Crypto Series(1)
- M471 Series(1)
- M479 Motor Control Series(1)
- M481 Base Series(4)
- M482 USB FS OTG Series(4)
- M483 CAN Series(4)
- M484 USB HS OTG Series(4)
- M485 Crypto Series(4)
- M487 Ethernet Series(4)
- M4TK Touch Key Series(25)
- NUC442/472 Series(130)
- NUC472 Series(1)
- NUC505 Series(138)
Products
Applications
Function
+
常見問答
如何計算完成一次ADC轉換所需要的時間? 日期:2020-04-13
ADC完整的轉換時間為取樣時間與轉換時間的和,計算公式如下所示:
TADC = TSMP + Tconv
其中Tconv = 1.625us 且取樣時間的計算公式如下所示:
,且 FADCAQT= Fsys
由上式可得知,在 Fsys = 16MHz 的條件下:
由於ADC轉換可設定為連續取樣模式或中斷模式,下面分別詳述轉換時間的計算方式:
1. 連續取樣模式
通過計算可以得出ADC 轉換率為500 ksps。
2. 中斷模式
需加上ADC軟啟動與等待ADC flag舉起的時間,以下圖為例約為9個指令週期時間
故
通過計算可以得出ADC 轉換率為390 ksps。
產品: | 微控制器 ,8 位元 8051 微控制器 ,工業級 8051 系列 ,低功耗 ML51 系列 |
---|---|
應用: | |
功能: | Peripherals,Analog,ADC |