FAQ

よくある質問

Does the LDO (Low Dropout Regulator) in the NuMicro® Family need to connect to an external capacitor?  日付:2015-09-25

To stabilize the LDO output voltage in a chip, an external capacitor needs to be connected to the LDO output pin LDO_CAP. The capacitor needs to be close to the LDO_CAP pin. If the chip series has multiple LDO output pins, each LDO output pin requires an external capacitor.

According to different NuMicro® Family series, the value of an external capacitor for LDO_CAP may be different. Please refer to the following table:

NuMicro® Family Series

Minimum Value of an External Capacitor

Mini51 Series

Do not need an external capacitor.

Mini58 Series

Do not need an external capacitor.

M051 Series

1 uF

M0518 Series

1 uF

NUC029xAN Series

1 uF

NUC029FAE Series

Do not need an external capacitor.

NUC100/120 Series

1 uF

NUC130/140 Series

1 uF

NUC122 Series

10 uF

NUC123 Series

1 uF

NUC131 Series

1 uF

NUC200/220 Series

1 uF

NUC230/240 Series

1 uF

Nano100 Series

10 uF

Nano1x2 Series

1 uF

NUC442/472 Series

1 uF

M451 Series

1 uF

NUC505 Series

4.7 uF

 

In addition, LDO_CAP can be connected to a 0.1uF bypass capacitor to filter high frequency noise.

製品: マイクロコントローラ ,Arm Cortex-M0 MCU ,M051 ベースシリーズ ,M0518シリーズ ,M0519シリーズ ,ミニ 51 ベースシリーズ ,ナノ 100/102 ベースシリーズ ,ナノ 110/112 LCD シリーズ ,ナノ 120 USB シリーズ ,ナノ 130 アドバンストシリーズ ,NUC029 シリーズ ,NUC100/200 アドバンストシリーズ ,NUC120/122/123/220 USB シリーズ ,NUC130/230 CAN シリーズ ,NUC131/NUC1311 CAN シリーズ ,NUC140/240 コネクティビティシリーズ ,Arm Cortex-M4 MCU ,M451 ベースシリーズ ,M451M シリーズ ,M452 USB シリーズ ,M453 CAN シリーズ ,NUC442/472 シリーズ ,NUC505 シリーズ
アプリケーション:
機能: Peripherals,Power Detection,LDO
This website uses cookies to ensure you get the best experience on our website. Learn more
OK