Debugger and Programmer

The Nuvoton Nu-Link Debug Adapter is an USB debugger and programmer that can debug and program Nuvoton NuMicro® Family Microcontrollers. There are four types of Nu-Link Debug Adapter in accordance with different specifications, including Nu-Link, Nu-Link-Pro.

All Nu-Link Debug Adapters support :
• Memory and flash read/write
• Direct register control in real time
• Hardware/software breakpoints insert
• Step-run program
• Semihost function under debug mode 

Ordering No.ContentFeature  Supported Device

 Nu-Link-Pro

 

• Nu-Link-Pro
• 2.54 mm 10-pin Cable

 

A basic debugger/programmer with programmable output VDD :
• USB 2.0 FS to SWD bridge
• On-line/off-line ICP up to 12 Mbps
• Programmable output VDD : 1.8 V, 2.5 V, 3.3 V, 5.0 V
• Wide target VDD input level : 1.8V ~ 5.5V

 NuMicro® Family 

Nu-Link

 

• Nu-Link
• 2.54 mm 10-pin Cable

 
A basic debugger/programmer supports :

• USB 2.0 FS to SWD bridge
• On-line/off-line ICP up to 12 Mbps

 NuMicro® Family 
       
ItemDownload Files 
1 Nu-Link User Manual  English   Chinese 
2 Supported IDE • NuEclipse  • KEIL MDK • IAR EWARM
3 Software(Driver) Nu-Link Keil DriverNu-Link IAR Driver
4 Programmer Software ICP Programming ToolNu-Link Command Tool
 5  Debug Tool NuTool-PinView NuConsole 

Programmer

The Nuvoton programmer is designed to do mass programming production of Nuvoton NuMicro® Family Microcontrollers device. With the flexible program setting and intuitive operation, users have full control over the mass-production flow.

NameContentFeature  Supported Device
Nu-Link-Gang • Nu-Link-Gang
• USB to mini USB cable
• Switching adapter AC 100-240 V to DC 9V/1A

A highly flexible and efficient programmer specially designed for mass-production :

• Control bus for automatic IC programming system
• 3 options of programming voltage : 1.8 V, 3.3 V, 5.0 V
• Off-line program up to four chips simultaneously or individually
• Off-line program up to four different chips with individual firmware image file
• LED status indicator for programming status check
• LCD display for programming status and detailed information checking

NuMicro® Family 
Nu-Link-Gang & Nuvoton ICP Gang Adapter • Nu-Link-Gang

• Nuvoton ICP Gang Adapter
• USB to mini USB cable
• Switching adapter AC 100-240 V to DC 9V/1A

Nuvoton ICP Gang Adapter is a printed circuit board with four sockets and supports all packages of NuMicro® Family Microcontroller ICP Gang Adapter. It can be plugged into the Nu-Link-Gang.

NuMicro® Family 
NuGang

End-of-sale

Please refer to Nu-Link-Gang

A basic programmer suitable for mass-production :

• Off-line program four chips simultaneously

• LED status indicator and LCD display for programming status check

NuMicro® Family 
ItemDownload Files 
1 Nu-Link-Gang Programmer Software  • ICP Programming Tool • Nu-Link Command Tool
2 NuGang Users Manual

  English  

3 NuGang Programmer Software  • NuGang Programmer

 

Nu-Link-Gang & General Nuvoton ICP Gang Adapter
NLG-128KX

• M480 Series
• M2351 Series
• M251 Series
• M031 Series

LQFP128 ( 14 mm x 14 mm )
NLG-64S

• M480 Series
• M2351 Series
• M251 Series
• M031 Series
• M261 Series

LQFP64 ( 7 mm x 7 mm )
NLG-48L

• M480 Series
• M251 Series
• M031 Series
• ML51 Series

LQFP48 ( 7 mm x 7 mm )
NLG-32Z • M480 Series

• M2351 Series
• M251 Series

QFN33 ( 5 mm x 5 mm )
NLG-32T

• M031 Series
• ML51 Series

QFN33 ( 4 mm x 4 mm )
NLG-144J

• M480 Series

LQFP144 ( 20 mm x 20 mm )

 

Nu-Link-Gang & Specific Nuvoton ICP Gang Adapter
NLG-NUC029SD • NUC029SDE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029SE • NUC029SEE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029SG • NUC029SGE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029LD • NUC029LDE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029LE • NUC029LEE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029LG • NUC029LGE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029NA • NUC029NAN QFN48 ( 7 mm x 7 mm )
NLG-NUC029ZA • NUC029ZAN QFN33 ( 5 mm x 5 mm )
NLG-NUC029TA • NUC029TAN QFN33 ( 4 mm x 4 mm )
NLG-NUC029FA • NUC029FAE TSSOP20 ( 4.4 mm x 6.5 mm )
NLG-NUC121Z • NUC121 / NUC125 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC123Z • NUC123 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC125L • NUC121 / NUC125 Series LQFP48 ( 7 mm x 7 mm )
NLG-NUC125Z • NUC121 / NUC125 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC126N • NUC126 Series QFN48 ( 7 mm x 7 mm )
NLG-NUC126S • NUC126 Series LQFP64 ( 7 mm x 7 mm )
NLG-NUC200S • NUC200 Series LQFP64 ( 7 mm x 7 mm )

Teilen

Geben Sie die E-Mail-Adresse, die Sie teilen wollen, ein.*
E-Mail*
Name*
Validierungscode*

Rückmeldung des Benutzers

Bitte bewerten Sie unsere Website
eMail
Name*
Validierungscode*

微信扫一扫,关注新唐MCU。

Anmelden bei My Nuvoton

So bleiben Sie über Änderungen an Dokumenten, die Sie herunterladen, informiert.
Wollen Sie sich nicht anmelden, schließen Sie einfach diese Seite und gehen direkt zu den Downloads.