Chat with us, powered by LiveChat

NuMaker-ML56SD

1. Install the preferred toolchain. Please make sure at least one of the toolchains has been installed.
  - KEIL C51
  - IAR EW8051
2. Download and install the latest Nuvoton Nu-Link Driver. Please install the Nu-Link USB Driver as well at the end of the installation.
  - Download and install Nu-Link_Keil_Driver when using Keil C51.
  - Download and install Nu-Link_IAR_Driver when using IAR EW8051
3. Download and unzip the Board Support Package (BSP).
  - Download and unzip ML51_Series_BSP_Keil when using Keil C51.
  - Download and unzip ML51_Series_BSP_IAR when using IAR EW8051
4. Hardware Setup
  (1) Open the virtual COM ( VCOM ) function by changing Nu-Link2-Me VCOM Switch No. 1 and 2 to ON.
   

  (2) Connect the ICE USB connector to the PC USB port through USB cable.
   

NuMaker-ML56SD-3

  (3) Find the “Nuvoton Virtual COM Port” at Device Manger.
   

5. Use the “Template” project as an example. The project can be found under the BSP folders.
  - ML51_BSP_Keil_C51_V2.XX.XXX
    - SampleCode
      - Template
          - .KEIL
6. Open and execute the project under the toolchain. For detail setting, please refer to the NuMaker-ML56SD User Manual.
7. User can see the result in the ternimal window on PC.
 

 

Resources

User Manual | Microcontrollers Software Development Tool | Driver (BSP) | Programmer | Nuvoton Official Forum | Nuvoton eStore

 

*Ordering Number : NK-ML56SD

This website uses cookies to ensure you get the best experience on our website. Learn more