Development Tool Hardware

  • Overview
  • Resources
  • Where to buy

The NuMaker Uno is a specific development tool for NuMicro® Cortex®-M0 series by which users can develop and verify the application program easily. The purpose is to provide a set of development and learning of both packages, with ADC, PWM, I²C, SPI, etc. peripheral functions, users can replace NuMaker Uno development kits with different functions can also be based on user needs its own peripheral functions development Kit, easy to use and yet develop the required flexibility. The NuMaker Uno includes two portions: the evaluation board and Nu-Link debugger/programmer. The Nu-Link is also included so users do not need additional ICE or debug equipment.

 



Features

  • Learning / Applications / debug: full range of development tools
  • Easy to carry the development debug kit
  • Rich microcontroller peripheral functions, such as ADC, PWM, I²C, SPI,  UART…
  • With high scalability: Connection board can change to a different application modules
  • Support Arduino UNO Revision 3 connectivity
  • Support Virtual COM port on USB
  • Support Arduino IDE, IAR EWARM, and Keil RVMDK development environment
  • Extension resources
    • Nuvoton Microelectronics Morpho extension pin headers for full access to all NUC131 I/Os
    • On-board Nu-Link debugger/programmer with SWD connector
  • Flexible board power supply
    • USB VBUS(can use jump to change 5V or 3.3V)
    • External VIN (7V<VIN<12V) supply voltage from transformer
    • External 2.5 ~ 5.5V supply voltage from other power source input to VDD pin
  • LEDs status
    • Power, user, Tx, Rx and ICE status.
  • One push button for RESET.

Resources


Arduino IDE & Board Installation Guide

1. Download and Install the Nu-Link USB Driver.
2. Download Arduino IDE from https://www.arduino.cc/
3. Run Arduino IDE installer to install it on PC.
4. Run Arduino IDE.
Go to File → Preferences, enter the following URL to textbox of ‘Additional Board Manager URLs’
https://raw.githubusercontent.com/OpenNuvoton/NuMaker-UNO/master/package_nuvoton_index.json
5. Arduino IDE : go to Tools → Board → Boards Manager
6. NuMaker UNO will show up on the list, select NuMaker UNO and click install.
After the package download is finished, go to Tools → Board and select NuMaker UNO to use it.

*Note: Please make sure the internet connection is active and unblocked.


Nuvoton Official Forum

NuForum_Logo

Nuvoton eStore

OrderOnline_en

TechDesign eMarket (Partner Channel)

 TDC_Icon

*Ordering Number: NK-UNO-131

Data Sheet

  • Development Tool

  • File name Version Update Download
  • UNO_TO_LORA_V1.00 1.00  2019/07/11
  • NK-NUC980 PCB file Rev1.1  2019/02/11
  • NK-NUC980 Gerber file Rev1.1  2019/02/11
  • Development Tools Hardware 2013/09/30
  • Development Tools Hardware 2 2013/09/30
  • HW_M451_LED_Display_Rev1.0 1.0  2015/02/13
  • HW_M452_Quad_Copter_Rev1.4 1.4  2015/10/01
  • HW_M480_OLED_Display_V1.00 1.00  2019/08/14
  • HW_M487_LV2_Advance_Board_V4.0 V4.0   2018/06/21
  • HW_M487_SMART_POWER_V1.1 V1.1  2018/12/07
  • HW_N76E003_CloseLoopBLDCMotorControl_V1.0 1.0  2018/12/17
  • HW_Nano103_LoRa_Gateway_V1.0 1.0  2018/02/05
  • HW_Nano120_LoRa_Badge_V1.0 1.0  2018/02/05
  • HW_NUC121_125_Gaming_Mouse_V1.0 1.0  2017/03/27
  • HW_NUC121_Gaming_LED_Lighting_V1.0 1.0  2018/07/27
  • HW_NUC131_Elevator_Complete_Solution_V1.0 1.0  2015/02/13
  • HW_NUC505_80mm_Thermal_Printer_V1.0 1.0  2015/11/20
  • HW_NUC505_RF_Microphone_Rev1.0 1.0  2015/10/26
  • HW_NuMaker_Brick_V1.2 1.2   2016/07/05
  • HW_NuMaker_PFM_M263KI_V1.2 1.2  2019/05/15
  • HW_NuMaker_PFM_NCU126_MotherBoard_V1.0 1.0  2018/07/31
  • HW_NuMaker_Uni_V1.0 1.0  2016/04/29
  • HW_NuTFT-SPI_320x240 Daughter Board_V1.3 1.3  2018/07/31
  • HW_NVSP0006_Mini55_5W_V1.7 1.7  2018/08/28
  • HW_NVSP0015_SDK_Type_C_Earphone_V1.0 1.0  2016/10/24
  • HW_NVSP0017_MINI57_15W_V2.3 2.3  2018/08/30
  • HW_NVSP0019_N76E003_5W_V1.1 1.1  2018/08/30
  • HW_NVSP0020_7.5W_NPT150_V2.2 2.2  2018/08/30
  • HW_UNO_TO_PCIE_V1.2 1.2  2019/04/11
  • ISD-DM3800 Quick Start Guide 1.0  2016/04/14
  • ISD15100 DMK Quick Start User's Guide 1.0  2016/04/14
  • ISD2100-DMK User's Guide 1.0  2016/04/14
  • ISD2360 DMK Quick Start Guide 1.0  2016/04/12
  • ISD2360 Demo User's Guide 1.0  2016/04/20
  • ISD15C00-ISD3900 DMK Quick Start Guide 1.0  2016/04/20
  • ISD9160 Demo User Manual 1.0  2016/04/06
  • ISD9160 Demo Users Guide 1.1  2016/04/20
  • ISD9360 Demo User's Gide 1.2  2016/04/22
  • HW_NUMAKER-PFM-M2351_V1.3 1.3  2018/08/30
  • HW_NuMaker-IoT-M263A_V1.1 1.1  2019/08/12
  • NuTiny-SDK-M4521_V1.1 1.1  2018/12/03
  • NuMaker-M483KG_V1.1 1.1  2019/07/04
  • HW_NUMAKER-ETM-M487_v1_2 1.2  2018/07/06
  • HW_NUMAKER-IOT-M487_v1_2 1.00  2018/09/08
  • ISD8102 Demo Uers Manual 1.0  2016/04/07
  • ISD1700 COB User's Manual 4.0  2016/04/14
  • ISD15100-3900-15C00 Demo User's manual 1.0  2016/04/20
  • ISD1900-1600 Evaluation Board Manual 1.0  2016/04/20
  • ISD-ES-MINI-USB User Manual 1.1  2016/04/23
  • Low Voltage Motor Development Module 2.2  2014/12/09
  • NuTiny-MS51DA_V1.1 1.1  2019/06/27
  • NuTiny-MS51FB_V11 V1.1  2019/03/04
  • RDK-N9H20 reference design kit, PCB file PCB1.0  2018/12/20
  • RDK-N9H20 reference design kit, gerber file PCB1.0  2018/12/20
  • N9H20 DEV schematic 2018/07/18
  • RDK-N9H30 reference design kit, gerber file PCB2.1  2018/12/19
  • RDK-N9H30 reference design kit, PCB file PCB2.1  2018/12/19
  • NAU82011VGEVB User's Manual 1.0  2016/04/07
  • NAU82011W Demo User's Guide 1.0  2016/04/12
  • NAU82011WG EVB User's Manual 1.0  2016/04/07
  • NAU82039 EVB User's Manual 1.0  2016/04/12
  • NAU8220 EVB User's manual 1.0  2016/04/12
  • NAU8223 EVB User's Manaul 1.0  2016/04/12
  • NAU8223 Demo Board User's guide 1.0  2016/04/12
  • NAU8224 EVB User's Manual 1.0  2016/04/12
  • NAU8224 Demo Board User's Guide 1.0  2016/04/12
  • NAU83P20 Demo board 1.0  2016/04/06
  • NAU83P20 Daughter Board 1.0  2016/04/06
  • NAU85L20 EVB User's Manual 1.0  2016/04/28
  • NAU85L40 EVB USer's Manual 1.0  2016/04/09
  • NDA102EC1_DALI_2nd_Slave_V1.0 1.0  2019/08/05
  • NK-980ETH2P reference design kit, gerber file V1.1  2019/08/18
  • NK-980ETH2P reference design kit, PCB file V1.1  2019/08/18
  • NU-TINY_N76E616_V2.1 V2.1  2017/09/09
  • Nu-LB_NUC140_Rev2.0 2.0  2014/07/16
  • Nu-LB_M051_Rev1.5 1.5  2011/07/26
  • Nu-LB_NANO130_Rev1.2 1.2  2013/11/07
  • NU-TINY N76E885_V21 V2.1  2017/03/10
  • NU-TINY_N79E715_V2.01 V2.01  2018/03/08
  • Nu-LB_M451_Rev1.2 1.2  2015/03/17
  • NUC029SEE_DALI_Master_V1.0 1.0  2019/08/05
  • NuDesign_UART2ETH V1.0  2016/10/03
  • NuDip_Mini58_Rev1.1 1.1  2016/11/17
  • NuEdu-UNO_NUC131_Rev1.5 1.5  2015/07/21
  • NuEdu-SDK_Nano130_Rev2.1 2.1  2014/06/11
  • NuEdu-SDK_NUC240_Rev2.0 2.0  2014/06/11
  • NuEdu-SDK_M451_Rev2.0 2.0  2014/10/17
  • NuEVB_NUC140_Rev1.7 1.7  2010/12/22
  • NuMaker-ML51PC_V1.1 V1.1  2019/03/04
  • NuMaker-M031TC_V1.1 1.1  2019/03/04
  • NuMaker-M031TB_V1.1 1.1  2019/03/04
  • NuMaker-M032SE_V1.3 1.3  2019/03/04
  • NuMaker-M031SD_V1.2 1.2  2019/03/04
  • NuMaker_NuWicam V1.0  2016/10/03
  • NuMicro_OrCAD_Library_V1.0 V1.0  2016/08/11
  • NuMicro_PADS_Library_V1.0 V1.0  2016/08/11
  • NuTiny-SDK_Mini54FDE_Rev1.0 1.0  2015/06/11
  • NuTiny-SDK_Mini58_Rev1.0 1.0  2015/07/09
  • NUTINY-SDK-M0519_V1.0 1.0  2016/03/31
  • NuTiny-SDK-NUC121_V1.1 1.1  2017/03/03
  • NuTiny-SDK-NUC125_V1.0 1.0  2017/03/03
  • NuTiny-SDK-NUC123 Schematic and Layout 1.1  2017/05/11
  • NUTINY-EVB-NANO103 2.0  2016/08/22
  • NuTiny-SDK-N76E003_V2.1 V2.1  2018/01/17
  • NuTiny-SDK-NUC126VG4AE_V1.0 1.0  2017/05/23
  • NuTiny-SDK-M0564VG4AE_V1.0 1.0  2017/05/23
  • NuTiny-SDK_M058SSAN_Rev2.1 2.1  2013/11/01
  • NuTiny-SDK_Nano100_Rev1.1 1.1  2014/01/02
  • NuTiny-SDK_Nano120_Rev1.2 1.2  2014/01/06
  • NuTiny-SDK-NUC120 1.01  2017/04/24
  • NuTiny-SDK-NUC100 Schematic 1.01  2017/04/24
  • NuTiny-SDK_NUC130_Rev1.0 1.0  2010/09/03
  • NuTiny-SDK-140 Schematic 1.00  2010/09/03
  • NuTiny-SDK_NUC122_Rev2.0 2.0  2014/07/16
  • NuTiny-SDK_NUC140_Rev1.0 1.0  2014/07/16
  • NuTiny-SDK_Nano130_Rev1.1 1.1  2013/01/30
  • NuTiny-SDK-Nano102 V1.5  2017/10/02
  • NuTiny-SDK_Nano112_Rev1.1 1.1  2014/07/07
  • NuTiny-SDK-NUC240 1.2  2016/09/22
  • NuTiny-SDK-NUC472_LQFP176_V3.0 3.0  2017/03/30
  • NuTiny-SDK-NUC442_LQFP144_V3.0 3.0  2017/03/28
  • NuTiny-SDK-NUC200 1.01  2017/04/24
  • NuTiny-SDK-NUC220VE3AN_LQFP100_V1.1 1.1  2017/04/24
  • NuTiny-SDK_Mini51_Rev3.0 3.0  2014/06/30
  • NuTiny-SDK_M051_Rev3.0 3.0  2014/06/30
  • NuTiny-SDK_NUC029FAE_Rev1.0 1.0  2014/07/11
  • NuTiny-SDK_NUC029LAN_Rev1.0 1.0  2014/07/11
  • NuTiny-SDK_M0518_Rev2.0 2.0  2014/12/05
  • NuTiny-SDK_NUC131_Rev2.0 2.0  2014/12/04
  • NuTiny-ML51EB_V10 V1.0  2019/03/04
  • NuTiny-SDK_M451_Rev1.3 1.3  2014/12/26
  • NuTiny-SDK_NUC029SGE_V1.0 1.0  2018/11/05
  • NuTiny-SDK_NUC505_Rev1.6 1.6  2019/01/13
  • NuTiny-SDK-M031TC_V1.0 1.0  2019/01/19
  • NuTiny-SDK_NUC029KGE_V1.0 1.0  2019/01/19
  • Mini51 Sensorless BLDC Motor Driver - PCB 1.00  2014/07/16
  • iPod Docking Demo - PCB_Gerber 1.0  2011/12/07
  • HW_NUMAKER-PFM-M487_V3.0 3.0  2018/04/24
  • HW_NuMaker-PFM-NANO130_V1.0 1.0  2018/07/16
  • NuTiny-SDK-ML51PCV11 V1.1  2019/01/22
  • NuTiny-SDK_NUC029SDE_V1.0 1.0  2018/10/19
  • NuTiny-SDK_NUC029SEE_V1.01 1.01  2018/10/19
  • NuTiny-SDK_NUC1261SG4AE_V1.0 1.00  2018/11/05

Share

Enter the Email address you like to share*
Your email*
Your name*
Validate Code*

User Feedback

Please rate our website
Email
Name*
Validate Code*

微信扫一扫,关注新唐MCU。

Login myNuvoton

to stay informed of any changes to the documents you download.
If you don't want to login, just close this page and download directly.