FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
よくある質問
How to use EBI to connect to the LCD module of i80 interface? Issue Date：2018-11-22
The pins required for connecting the EBI to the LCD module of i80 interface are as follows:
EBI_AD [ 15 : 0 ]: EBI data bus
( 16-bit data width, EBI_AD [ 15 : 0 ] for EBI interface; EBI_AD [ 7 : 0 ] for EBI interface if 8-bit data width )
EBI_nCSx: Slave device enable signal, controlled by the master device ( EBI chip select output )
EBI_nRD: EBI read enable output
EBI_nWR: EBI write enable output
The LCD Module ( LCDT24963701 ) is illustrated as follows:
DB: Data Bus
nCS: CD chip select output
RS: Register selection, RS = 1: write data; RS = 0: write command
RST: LCD driver chip reset signal
RD: Read enable signal
WR: Write enable signal
LED: Backlight control pin
X+: Touch screen XL
X-: Touch screen XR
Y+: Touch screen YU
Y-: Touch screen YD
For the sample code, refer to the following website:
https://www.nuvoton.com/hq/resource-download.jsp?tp_GUID=EC0120180326104843
| Products: | |
|---|---|
| Applications: | |
| Function: | Peripherals,I/O,External Bus Interface (EBI) |