FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
Products
Applications
Function
+
よくある質問
Why are parts of the M0519 pins unable to control the output to a high or low state after being configured as the GPIO function? 日付：2018-11-26
Since the pins with EPWM0, EPWM1, and BPWM output functions (P0.0 - P0.5, P1.0 - P1.5, P5.6 - P5.7) are often used to control the upper and lower MOSFET of bridge circuit. To avoid MOSFET damage caused by simultaneous high output at power-on, the initial state of these pins is determined by Config0[12:8].
The user can change the settings of Config0[12:8] such that these pins are controlled by the GPIO register after power-on. Or PWMPOEN[4:0] is set to 0 to release the Hi-Z state after power-on when the program starts to operate.
| 製品: | マイクロコントローラ ,Arm Cortex-M0 MCU ,M0519シリーズ |
|---|---|
| アプリケーション: | |
| 機能: | Peripherals,I/O,GPIO,Memory,Config,Timer and PWM,PWM-Capture,PWM Output |