Häufig gestellte Fragen
- M051-Base-Serie(95)
- M0518-Serie(97)
- M0519-Serie(43)
- M0564-Serie(1)
- Mini51-Base-Serie(90)
- Nano100/102-Base-Serie(101)
- Nano103-Base-Serie(10)
- Nano110/112-LCD-Serie(100)
- Nano120-USB-Serie(111)
- Nano130-Advanced-Serie(110)
- NUC029-Serie(94)
- NUC100/200-Advanced-Serie(102)
- NUC120/122/123/220-USB-Serie(116)
- NUC121/125-Serie(1)
- NUC126-USB-Serie(2)
- NUC130/230-CAN-Serie(103)
- NUC131-NUC1311-CAN-Serie(98)
- NUC140/240-Konnektivität-Serie(114)
常见问答
How to change the Nu-Link Pro I/O voltage? 日付：2016-12-20
The Nu-Link Pro I/O voltage can be adjusted through the ICP Programming Tool, Keil RVMDK and IAR EWARM.
The steps are as follows:
- ICP Programming Tool
1. After the ICP Programming Tool is opened, click on the "Options" in the "Programming" section, as shown in Figure 1, to enable programming options.
Figure 1
2. In the “Nu-Link Pro IO Voltage” section, select the Nu-Link Pro I/O Voltage, as shown in Figure 2.
Figure 2
3. After clicking "OK", the Nu-Link Pro I/O voltage will be changed immediately.
- Keil RVMDK
1. In the Project → Options for Target → Debug page, click "Settings" to open the "Debug" window, as shown in Figure 3.
Figure 3
2. In the "Power Control" section, select the Nu-Link Pro I/O voltage.
3. The Nu-Link Pro I/O voltage can be changed only when the "Download" or "Start / Stop Debug Session" is executed.
- IAR EWARM
1. Open the Nu-Link settings window through Nu-Link→Nu-Link Monitor, as shown in Figure 4.
Figure 4
2. In the “Target power control” section, select the Nu-Link Pro I/O voltage.
3. The Nu-Link Pro I/O voltage can be changed only when the “Download and Debug” or “Debug without Downloading” is executed.
| 製品: | マイクロコントローラ ,Arm Cortex-M0 MCU ,Arm Cortex-M4 MCU |
|---|---|
| アプリケーション: | |
| 機能: | Software and Tools,Development-Environment,IAR,Keil,ICE & Downloader,Nu-Link-Pro (ICE),Nu Tools,In Circuit Programming (ICP) Tool |