Häufig gestellte Fragen
- M051-Base-Serie(95)
- M0518-Serie(97)
- M0519-Serie(43)
- M0564-Serie(1)
- Mini51-Base-Serie(90)
- Nano100/102-Base-Serie(101)
- Nano103-Base-Serie(10)
- Nano110/112-LCD-Serie(100)
- Nano120-USB-Serie(111)
- Nano130-Advanced-Serie(110)
- NUC029-Serie(94)
- NUC100/200-Advanced-Serie(102)
- NUC120/122/123/220-USB-Serie(116)
- NUC121/125-Serie(1)
- NUC126-USB-Serie(2)
- NUC130/230-CAN-Serie(103)
- NUC131-NUC1311-CAN-Serie(98)
- NUC140/240-Konnektivität-Serie(114)
よくある質問
How to use the ICP Programming Tool to write a serial number? 日付:2016-12-20
Once you open the ICP Programming Tool, you can click on the "Options" in the "Programming" section, as shown in Figure 1, to enable programming options.

Figure 1
In the programming options, check the "Write Software Serial Number" in the "Operation" section (shown in Figure 2) to open the Software Serial Number (SN) section (shown in Figure 3).

Figure 2

Figure 3
In the "Software Serial Number" section, the user can enter the starting value of the serial number and the on-chip Flash write address. The serial number is automatically incremented by 1 when the programming is successful, and the serial number is automatically incremented after the programming is completed (whether successful or not) by means of offline programming.
| 製品: | マイクロコントローラ ,Arm Cortex-M0 MCU ,Arm Cortex-M4 MCU |
|---|---|
| アプリケーション: | |
| 機能: | Software and Tools,ICE & Downloader,Nu-Link-Me (ICE),Nu-Link-Pro (ICE),Nu-Link (ICE),Nu Tools,In Circuit Programming (ICP) Tool |