よくある質問
- M051 ベースシリーズ(95)
- M0518シリーズ(97)
- M0519シリーズ(43)
- M0564 シリーズ(1)
- ミニ 51 ベースシリーズ(90)
- ナノ 100/102 ベースシリーズ(101)
- Nano103 ベースシリーズ(10)
- ナノ 110/112 LCD シリーズ(100)
- ナノ 120 USB シリーズ(111)
- ナノ 130 アドバンストシリーズ(110)
- NUC029 シリーズ(94)
- NUC100/200 アドバンストシリーズ(102)
- NUC120/122/123/220 USB シリーズ(116)
- NUC121/125シリーズ(1)
- NUC126 USB シリーズ(2)
- NUC130/230 CAN シリーズ(103)
- NUC131/NUC1311 CAN シリーズ(98)
- NUC140/240 コネクティビティシリーズ(114)
よくある質問
Why can’t the GPIO PA0 and PA1 pins in the NuMicro® NUC442/NUC472 series be normally output to the High voltage level? 日付:2016-08-18
Since the power source of GPIO PA.0 and PA.1 pins in the NUC442/NUC472 series is from the VBAT pin, different from the power supply of other GPIO pins from VDD. Thus, it is necessary to provide a constant power supply to the VBAT pin. The VBAT pin shall not be floating; otherwise, the PA.0 and PA.1 pins cannot be output to the High voltage level.
The following shows the NUC442/NUC472 series power distribution diagram.
| 製品: | マイクロコントローラ ,Arm Cortex-M4 MCU ,NUC442/472 シリーズ |
|---|---|
| アプリケーション: | |
| 機能: | Peripherals,Clock Control,LXT,I/O,GPIO |