よくある質問
- M051 ベースシリーズ(95)
- M0518シリーズ(97)
- M0519シリーズ(43)
- M0564 シリーズ(1)
- ミニ 51 ベースシリーズ(90)
- ナノ 100/102 ベースシリーズ(101)
- Nano103 ベースシリーズ(10)
- ナノ 110/112 LCD シリーズ(100)
- ナノ 120 USB シリーズ(111)
- ナノ 130 アドバンストシリーズ(110)
- NUC029 シリーズ(94)
- NUC100/200 アドバンストシリーズ(102)
- NUC120/122/123/220 USB シリーズ(116)
- NUC121/125シリーズ(1)
- NUC126 USB シリーズ(2)
- NUC130/230 CAN シリーズ(103)
- NUC131/NUC1311 CAN シリーズ(98)
- NUC140/240 コネクティビティシリーズ(114)
よくある質問
What restrictions do users need to pay attention when using the GPIO De-bounce function? 日付:2016-07-18
The GPIO De-bounce function is used to filter noise or interference on the pin.
After a voltage signal generates a rising or falling edge, if the time to keep high or low level exceeds the De-bounce time set by the user, a GPIO interrupt occurs.
However, there is a limitation related to this function. When the chip is in Power-down mode, the GPIO De-bounce function is turned off. In other words, when the chip is in Power-down mode, once there is a GPIO signal, the GPIO interrupt occurs if the condition of edge-triggered GPIO interrupt is met.
| 製品: | マイクロコントローラ ,8ビット 8051 MCU ,Arm Cortex-M0 MCU ,Arm Cortex-M4 MCU |
|---|---|
| アプリケーション: | |
| 機能: | Peripherals,I/O,GPIO,System Operation,Power-down |