Häufig gestellte Fragen

Häufig gestellte Fragen

Does the lack of nReset pin with regard to the SWD or ICE interface cause any restriction?  Datum:2016-07-18

The SWD or ICE interface contains five pins, including VDD, ICE_DAT, ICE_CLK, nReset and VSS.
Through the SWD or ICE interface, the user can do MCU programming or debugging with the Nu-Link. Specifically, the nReset pin is used to reset the MCU or initialize SWD and ICE signals.
If the Reset pin is missing, although the system can perform debugging normally, because it has failed to reinitialize SWD and ICE signals, the MCU cannot accept the "whole chip erase" command. In other words, once the chip is locked, the chip locked state cannot be released through the "whole chip erase".

Produkte: Mikrocontroller ,8-bit-8051-MCUs ,Arm Cortex-M0-MCUs ,Arm Cortex-M4-MCUs
Applikationen:
Funktion: Peripherals,System Operation,Reset,Software and Tools,Nu Tools,In Circuit Programming (ICP) Tool
This website uses cookies to ensure you get the best experience on our website. Learn more
OK