FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
Products
Applications
Function
+
FAQ
Why does the "Invalid Chip ID" error message appear and Part No. show Unknown when using the NuMicro® ISP Programming Tool connection? Issue Date：2015-10-16
In the installation folder for the ISP Programming Tool, “config.ini” records PDID (Part Device Identification Number) of all the NuMicro® series. After connection, the ISP Programming Tool will compare the PDID of target chip with the “config.ini”. If the “config.ini” gets lost or the PDID of target chip is not listed in “config.ini”, the "Invalid Chip ID" error message appears on the ISP Programming Tool, or Part No. shows Unknown.
User can download the latest version of NuMicro® ISP Programming Tool from Nuvoton website.
| Products: | Microcontrollers ,Arm Cortex-M0 MCUs ,M051 Base Series ,M0518 Series ,M0519 Series ,Mini51 Base Series ,Nano100/102 Base Series ,Nano110/112 LCD Series ,Nano120 USB Series ,Nano130 Advanced Series ,NUC029 Series ,NUC100/200 Advanced Series ,NUC120/122/123/220 USB Series ,NUC130/230 CAN Series ,NUC131/NUC1311 CAN Series ,NUC140/240 Connectivity Series ,Arm Cortex-M4 MCUs ,M451 Base Series ,M451M Series ,M452 USB Series ,M453 CAN Series ,NUC442/472 Series ,NUC505 Series |
|---|---|
| Applications: | |
| Function: | Peripherals,Memory,Flash Memory Controller (FMC),Software and Tools,Nu Tools,In System Programming (ISP) Tool |