よくある質問
- M051 ベースシリーズ(95)
- M0518シリーズ(97)
- M0519シリーズ(43)
- M0564 シリーズ(1)
- ミニ 51 ベースシリーズ(90)
- ナノ 100/102 ベースシリーズ(101)
- Nano103 ベースシリーズ(10)
- ナノ 110/112 LCD シリーズ(100)
- ナノ 120 USB シリーズ(111)
- ナノ 130 アドバンストシリーズ(110)
- NUC029 シリーズ(94)
- NUC100/200 アドバンストシリーズ(102)
- NUC120/122/123/220 USB シリーズ(116)
- NUC121/125シリーズ(1)
- NUC126 USB シリーズ(2)
- NUC130/230 CAN シリーズ(103)
- NUC131/NUC1311 CAN シリーズ(98)
- NUC140/240 コネクティビティシリーズ(114)
よくある質問
How to allow a chip not to be reset when entering Debug mode? 日付:2015-10-15
• Keil RVMDK:
User can complete the setting in the Target Option window of Keil compiler environment:
- Select ”Not reset” in the pull-down menu of the Reset Options in the Debug tab;
- Uncheck the “Update Target before Debugging” in the Utilites tab.
After the setup, as shown below, the chip will not be reset when entering Debug mode. User can see the current state of the chip in Debug mode under the Keil compiler environment.


• IAR EWARM:
The function ”Not reset and enter Debug mode” is not supported in the current IAR compiler environment.
| 製品: | マイクロコントローラ ,Arm Cortex-M0 MCU ,M051 ベースシリーズ ,M0518シリーズ ,M0519シリーズ ,ミニ 51 ベースシリーズ ,ナノ 100/102 ベースシリーズ ,ナノ 110/112 LCD シリーズ ,ナノ 120 USB シリーズ ,ナノ 130 アドバンストシリーズ ,NUC029 シリーズ ,NUC100/200 アドバンストシリーズ ,NUC120/122/123/220 USB シリーズ ,NUC130/230 CAN シリーズ ,NUC131/NUC1311 CAN シリーズ ,NUC140/240 コネクティビティシリーズ ,Arm Cortex-M4 MCU ,M451 Base シリーズ ,M451M シリーズ ,M452 USB シリーズ ,M453 CAN シリーズ ,NUC442/472 シリーズ ,NUC505 シリーズ |
|---|---|
| アプリケーション: | |
| 機能: | Software and Tools,Development-Environment,IAR,Keil |