FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
- M451 Base Series(118)
- M451M Series(117)
- M452 USB Series(130)
- M4521 USB Series(1)
- M453 CAN Series(128)
- M463 CAN FD/USB HS Series(1)
- M467 Ethernet/Crypto Series(1)
- M471 Series(1)
- M479 Motor Control Series(1)
- M481 Base Series(4)
- M482 USB FS OTG Series(4)
- M483 CAN Series(4)
- M484 USB HS OTG Series(4)
- M485 Crypto Series(4)
- M487 Ethernet Series(4)
- M4TK Touch Key Series(25)
- NUC442/472 Series(130)
- NUC472 Series(1)
- NUC505 Series(138)
Products
Applications
Function
+
FAQ
Show logo when booting Issue Date:2025-01-17
| 1. | Go to the following path and open U-Boot menuconfig: |
~/yocto/build/tmp-glibc/work/numaker_som_ma35d16a81-poky-linux/u-boot-ma35d1/2020.07-r0/git$ make menuconfig |
|
| 2. | Enable LCD driver and modify RAM size in U-Boot: |
Device Drivers --->
Graphics support --->
[*] Enable driver model support LCD/video
[*] Nuvoton MA35D1 video support
(0x8C800000) MA35D1 DCU framebuffer address
|
|
| 3. | According to your boot source, modify the U-Boot environment: |
~/yocto/build/tmp-glibc/work/numaker_som_ma35d16a81-poky-linux/u-boot-ma35d1/2020.07-r0/git/include/configs$ vim ma35d1.h
"mmc read ${kernel_addr_r} 0x1800 0x8000; " \
"mmc read ${fdt_addr_r} 0x1600 0x80; " \
"mmc read ${bmp_addr_r} 0xe000 0x1000; " \
"bmp display ${bmp_addr_r}; " \
"booti ${kernel_addr_r} - ${fdt_addr_r}; "
|
|
| 4. | According to your evaluation board, modify the device to close display initialization function: |
~/yocto/build/tmp-glibc/work-shared/numaker-som-ma35d16a81/kernel-source/arch/arm64/boot/dts/nuvoton$ vim ma35d1-som-256m.dts
&display {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display0>;
memory-region = <&display_buf>;
//resets = <&reset MA35D1_RESET_DISP>;
status = "okay";
};
|
|
| 5. | Re-define the U-Boot RAM size: |
~/yocto/build/tmp-glibc/work/numaker_som_ma35d16a81-poky-linux/u-boot-ma35d1/2020.07-r0/git/arch/arm/dts$ vim ma35d1-sdcard0.dts
memory {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x0F000000>; /* 112M */
};
|
|
| 6. | Close default logo from Yocto: |
~/yocto/build/conf$ vim local.conf IMAGE_FEATURES_remove += " splash " |
|
| 7. | Rebuild U-Boot, Linux kernel, and re-pack Image: |
~/yocto/build$ bitbake u-boot-ma35d1 linux-ma35d1 -C compile && \ bitbake nvt-image-qt5 -c cleanall && \ bitbake nvt-image-qt5 |
|
| 8. | Program the Image to MA35D1 |
| 9. | Use NuWriter to program the bmp file to address 0x1C00000 |
![]() |
| Products: | Microprocessors ,Arm Cortex-A35 MPUs |
|---|---|
| Applications: | |
| Function: | Others,Boot source,Buildroot |
