FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
- M451 Base Series(118)
- M451M Series(117)
- M452 USB Series(130)
- M4521 USB Series(1)
- M453 CAN Series(128)
- M463 CAN FD/USB HS Series(1)
- M467 Ethernet/Crypto Series(1)
- M471 Series(1)
- M479 Motor Control Series(1)
- M481 Base Series(4)
- M482 USB FS OTG Series(4)
- M483 CAN Series(4)
- M484 USB HS OTG Series(4)
- M485 Crypto Series(4)
- M487 Ethernet Series(4)
- M4TK Touch Key Series(25)
- NUC442/472 Series(130)
- NUC472 Series(1)
- NUC505 Series(138)
Products
Applications
Function
+
FAQ
Understanding IMAGE_INSTALL library in Yocto build system Issue Date：2025-03-03
• IMAGE_INSTALL is a variable in the Yocto build system.
• It is used to specify the list of packages to be installed in the generated image.
• The variable is set in the image recipe file (.bb file).
• The IMAGE_INSTALL variable is used to specify which packages should be included in the generated image.
• The Yocto build system will add the required packages to the image based on these settings.
• To check the list of installed packages, the command bitbake -e nvt-image-qt5 | grep ^IMAGE_INSTALL can be used.
$ bitbake -e nvt-image-qt5 | grep ^IMAGE_INSTALL |
This command will display the lines starting with IMAGE_INSTALL, showing the configured package installation settings.
| Products: | Microprocessors ,Arm Cortex-A35 MPUs |
|---|---|
| Applications: | |
| Function: | Others,Library,Yocto |