Home > Products > Microcontrollers > Arm Cortex-M23 MCUs > M254/M256/M258 Low Power LCD Series > M258KE3AE

Enter the Email address you like to share
Email
Name
Validate Code
Submit Cancel

Microcontrollers(603)

Microprocessors(43)

Smart Home Audio(325)

M258KE3AE

M258

The NuMicro M258KE3AE 32-bit microcontroller is based on Arm Cortex-M23 core using Armv8-M architecture with COM/SEG LCD driver, capacitive touch sensing function, and USB 2.0 full speed device.. It runs up to 48 MHz and features 128 Kbytes Flash memory, 16 Kbytets SRAM, 1.75V ~ 5.5V wide operating voltage, 5V I/O tolerance, and -40℃ to +105℃ operating temperature. 

M258KE3AE includes a 8 x 44, 6 x 46, 4 x 48 COM/SEG LCD driver with selectable bias voltage and duty, and it also built-in charge-pump to support 3V to 5V wide voltage of LCD panel; Capacitive touch sensing function with up to 16 touch-keys with single-scan or programmable periodic key-scans is supported; it also equipped with a crystal-less USB 2.0 full speed device, compling with USB Battery Charging Detection v1.2 (BC 1.2) profile for high-speed battery charging. 

M258KE3AE provides plenty of peripherals such as Timers, Watchdog Timers, RTC, 5 channels of PDMA, 3 sets of UART, 1 setof Universal Serial Control Interface (USCI), 1 set of SPI/ I²S, 1 set of I²C, 1 set of ISO-7816-3, 6 channels of basic PWM, making it highly suitable for connecting comprehensive external modules. It also integrates high performance analog circuit, such as 16 channels of 12-bit 730 kSPS ADC, and a temperature sensor to reduce external components. 

Supported packages LQFP128 (14mm x 14mm) with pin-compatible for different part numbers make the system design and parts change easily.

Target Application:

  • Handheld meter
  • Thermostat
  • Smart Home / Home Appliance
  • Industrial Control / Industrial Automation
  • Temperature/Humidity Logger

Key Features:

• Operating Characteristics
  - Voltage range: 1.75V ~ 5.5V
  - Temperature range: - 40 ℃ ~ 105 ℃
  - EFT 4.4 KV
  - ESD HBM 7 KV
   
• Core
  - Arm Cortex-M23 core using Armv8-M architecture, running up to 48 MHz, without TrustZone
  - 32-bit hardware multiplier/divider
     
• Memories
  - 128 KB Flash
  - 16 KB SRAM
  - 4 KB LDROM
  - 1-region eXecute-Only-Memory (XOM)
  - ISP/ICP/IAP programming
     
• Clocks
  - 4 ~ 32 MHz external high speed crystal oscillator (HXT) for precise timing operation
  - 32.768 kHz external low speed crystal oscillator (LXT) for RTC function and low-power system operation
  - 48 MHz internal high speed RC oscillator (HIRC) for system operation (Factory pre-trimmed to ±0.25% and frequency deviation ±2.5% over entire temperature from -40°C ~ 105 °C)
  - 4.032 MHz internal high speed RC oscillator (MIRC) for system operation
  - 38.4 kHz internal low speed RC oscillator (LIRC) for Watchdog Timer and wake-up operation
     
• COM/SEG LCD Driver
  - 8 x 44, 6 x 46 & 4 x 48 COM/SEG LCD Driver
  - Built-in charge-pump feature
  - Supports 3V to 5V LCD panel
  - Supports 1/2, 1/3 and 1/4 bias voltage
  - Supports 1/4 duty, 1/6 duty and 1/8 duty
     
• Capacitive Touch Sensing
  - Up to 16 touch keys with single-scan or programmable periodic key-scans features
     
• Power management
  - Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
  - Built-in LDO Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
  - Built-in LDO
  - Support RTC with independent VBAT voltage source pin
   
• Low Power Consumption
  - 110 μA/MHz in operating mode
  - 3.8 μA in Power-down mode (RTC on, RAM retention)
  - 2.2 μA in Power-down mode (RTC off, RAM retention)
  - 1.6 μA in Deep Power-down mode
     
• Timers
  - Four 32-bit timers
  - One 24-bit SysTick timer
  - One independent watchdog
  - One window watchdog
  - RTC with Calendar and Alarm
     
• PDMA
  - 5 channels
     
• Analog
  - 16 channels of 12-bit 730 kSPS ADC
  - 2 sets of rail-to-rail analog comparators (ACMP)
     
• Communication interfaces
  - 3 sets of UART interfaces
  - 1 set of I²C interfaces
  - 1 set of SPI/I²S
  - 1 set of Smart Card Interface (ISO-7816-3)
  - 1 set of USCI (configured as UART, SPI or I²C)
     
• USB
  - Up to 1 set of USB 2.0 full speed device with on-chip PHY (crystal-less design)
  - Supports USB Battery Charging Detection v1.2 (BC 1.2) profile
     
• 96-bit Unique ID ( UID )
     
• 128-bit Unique Customer ID ( UCID )
     
• Packages
  - LQFP128 ( 14 mm x 14 mm )
     

Contact Us

以綠色半導體技術豐富人類生活的隱形冠軍

Be a hidden champion in providing sustainable semiconductors to enrich human life.

Terms of Use Privacy Policy Contact us Site Map

Copyright ©2008-2022 Nuvoton Technology Corporation

This website uses cookies to ensure you get the best experience on our website. Learn more
OK