Nu-Link-Me/Nu-Link2-Me
Nu-Link-Me
The Nu-Link-Me is a simple debugger and programmer with debug and on-line programming function, only provided with the NuTiny development board, and can be used independently to develop NuMicro® family microcontrollers.
Nu-Link2-Me provides virtual COM port (VCOM) function to print out messages on PC.
Nu-Link2-Me
The Nu-Link2-Me is a simple debugger and programmer with debug and on-line/off-line programming function, only provided with the NuMaker development board, and can be used independently to develop NuMicro® family microcontrollers.
The on-board 16 Mbit SPI Flash allows it able to support off-line programming.
Nu-Link2-Me provides virtual COM port (VCOM) function to print out messages on PC.
 |
 |
| Name | Feature | Supported Device | User Manual | Hardware Resources |
|---|---|---|---|---|
| Nu-Link-Me | A basic debugger/programmer, through the resistor to adjust SWD interface voltage : • USB 2.0 FS to SWD interface • SWD interface up to 12 Mbps • On-line ISP firmware update : UART • Hardware setting SWD interface voltage : 3.3 V, 5.5 V • Virtual COM port |
NuMicro® Family | - (Refer to NuMaker User Manual) | - |
| Nu-Link2-Me | A basic debugger/programmer, through the resistor to adjust SWD interface voltage : • USB 2.0 HS to SWD interface • SWD interface up to 12 Mbps • On-line/off-line ISP firmware update : UART • Hardware setting SWD interface voltage : 1.8V, 3.3 V, 5.0 V • Virtual COM port |
NuMicro® Family | - (Refer to NuMaker User Manual) | ✓ |