FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
よくある質問
Why is the Boot Select setting in the Config0/1 not valid in Keil ICE Debug mode? 日付:2018-11-26
In the ICE Debug mode, the code will be programmed in the area selected by the Flash Select field (APROM or LDROM) and boot from this area instead of booting from the area set by Boot Select in the Config0/1.
Therefore, regardless of the Boot Select setting in the Config0/1, in Debug mode, the code will be programmed in the area selected by Flash Select and the chip will boot from this area.
| 製品: | マイクロコントローラ ,8ビット 8051 MCU ,Arm Cortex-M0 MCU ,Arm Cortex-M23マイクロコントローラ ,Arm Cortex-M4 MCU |
|---|---|
| アプリケーション: | |
| 機能: | Peripherals,Memory,APROM,LDROM,Software and Tools,Development-Environment,Keil |