よくある質問
- M051 ベースシリーズ(95)
- M0518シリーズ(97)
- M0519シリーズ(43)
- M0564 シリーズ(1)
- ミニ 51 ベースシリーズ(90)
- ナノ 100/102 ベースシリーズ(101)
- Nano103 ベースシリーズ(10)
- ナノ 110/112 LCD シリーズ(100)
- ナノ 120 USB シリーズ(111)
- ナノ 130 アドバンストシリーズ(110)
- NUC029 シリーズ(94)
- NUC100/200 アドバンストシリーズ(102)
- NUC120/122/123/220 USB シリーズ(116)
- NUC121/125シリーズ(1)
- NUC126 USB シリーズ(2)
- NUC130/230 CAN シリーズ(103)
- NUC131/NUC1311 CAN シリーズ(98)
- NUC140/240 コネクティビティシリーズ(114)
製品
機能
+
FAQ
What to do when the NUC505 USBD is set to Full-speed mode and the master sends the "SET REPORT" command but the NUC505 is not detected normally? Issue Date:2018-11-26
When the NUC505 USBD is in Full-speed mode, due to hardware limitations, the master will be unable to be detected normally after sending the "SET REPORT" command. This can be solved by setting the Set Endpoint buffer to increase the length by 4 Bytes.
/* Control endpoint */
USBD_SetEpBufAddr(CEP, CEP_BUF_BASE, CEP_BUF_LEN+4);
| Products: | Microcontrollers ,Arm Cortex-M0 MCUs ,NUC131/NUC1311 CAN Series |
|---|---|
| Applications: | |
| Function: | Peripherals,Connectivity,CAN |