SeriesDescriptionMain FunctionVersionDate
Mini51 Composite V1.0 2015-12-15
The fan speed is captured by Timer0 Capture, and then adjusted through PWM2.
Mini51 I2C V1.0 2015-12-15
A master transfers data to a slave. That is, the master transfers the slave address to call the slave, and then sends the data address to the slave and keeps transmitting 10 data to the slave. The slave saves data in sequence to the data address. After the transmission, the master will start to read data; the master sends the slave address and data address to the slave, and gets 10 data back in sequence from the slave. At last, the master compares the received data with the original data for verification.
Mini51 PWM V1.0 2015-12-15
PWM output is configured to trigger ADC, and can be stopped by brake function. 
M051 ADC V1.0 2015-12-15
Transform band-gap voltage through ADC7, and then use band-gap voltage to calculate ADC reference voltage. After that, use ADC7 to transform the value detected by a temperature sensor to calculate the voltage of temperature sensor.
M051 Composite V1.0 2015-12-15
Use GPIO to create software UART if the number of hardware UART is insufficient. This example is to create UART protocol from GPIO through time interrupt.
NUC122 USBD V1.0 2015-12-15
Support HID keyboard and mouse devices simultaneously. Add source code to control Multi-Media Keys and LEDs. 
NUC122 USBD V1.0 2015-12-15
Support USB Selective Suspend function:
1.Need to declare USB 2.0 device
2.Add 0xee to String descriptor
3.Support vender command
4.Support Windows 8 or later
NUC123 SPI V1.0 2015-12-15
Speed up SPI Read/Write function by using Dual I/O.
NUC123 USBD V1.0 2015-12-15
Vender command sends data through the control transfer. There are three steps: setup, data and status.

共有する

共有するメールアドレスを入力する*
電子メール*
名前*
認証コード*

ユーザーのご意見・ご感想

弊社ウェブサイトへの評価をお願いします
電子メール
名前*
認証コード*

微信扫一扫,关注新唐MCU。

マイ ヌヴォトンのログイン

ダウンロードした文書のすべての変更に関する情報をいつも入手します。
ログインしない場合は、このページを閉じて直接ダウンロードしてください。