Debugger and Programmer

The Nuvoton Nu-Link Debug Adapter is an USB debugger and programmer that can debug and program Nuvoton NuMicro® Family Microcontrollers. There are four types of Nu-Link Debug Adapter in accordance with different specifications, including Nu-Link, Nu-Link-Pro.

All Nu-Link Debug Adapters support :
• Memory and flash read/write
• Direct register control in real time
• Hardware/software breakpoints insert
• Step-run program
• Semihost function under debug mode 

Ordering No.ContentFeature  Supported Device

 Nu-Link-Pro

 

• Nu-Link-Pro
• 2.54 mm 10-pin Cable

 

A basic debugger/programmer with programmable output VDD :
• USB 2.0 FS to SWD bridge
• On-line/off-line ICP up to 12 Mbps
• Programmable output VDD : 1.8 V, 2.5 V, 3.3 V, 5.0 V
• Wide target VDD input level : 1.8V ~ 5.5V

 NuMicro® Family 

Nu-Link

 

• Nu-Link
• 2.54 mm 10-pin Cable

 
A basic debugger/programmer supports :

• USB 2.0 FS to SWD bridge
• On-line/off-line ICP up to 12 Mbps

 NuMicro® Family 
       
ItemDownload Files 
1 Nu-Link User Manual  English   Chinese 
2 Supported IDE • NuEclipse  • KEIL MDK • IAR EWARM
3 Software(Driver) Nu-Link Keil DriverNu-Link IAR Driver
4 Programmer Software ICP Programming ToolNu-Link Command Tool
 5  Debug Tool NuTool-PinView NuConsole 

Programmer

The Nuvoton programmer is designed to do mass programming production of Nuvoton NuMicro® Family Microcontrollers device. With the flexible program setting and intuitive operation, users have full control over the mass-production flow.

NameContentFeature  Supported Device
Nu-Link-Gang • Nu-Link-Gang
• USB to mini USB cable
• Switching adapter AC 100-240 V to DC 9V/1A

A highly flexible and efficient programmer specially designed for mass-production :

• Control bus for automatic IC programming system
• 3 options of programming voltage : 1.8 V, 3.3 V, 5.0 V
• Off-line program up to four chips simultaneously or individually
• Off-line program up to four different chips with individual firmware image file
• LED status indicator for programming status check
• LCD display for programming status and detailed information checking

NuMicro® Family 
Nu-Link-Gang & Nuvoton ICP Gang Adapter • Nu-Link-Gang

• Nuvoton ICP Gang Adapter
• USB to mini USB cable
• Switching adapter AC 100-240 V to DC 9V/1A

Nuvoton ICP Gang Adapter is a printed circuit board with four sockets and supports all packages of NuMicro® Family Microcontroller ICP Gang Adapter. It can be plugged into the Nu-Link-Gang.

NuMicro® Family 
NuGang

End-of-sale

Please refer to Nu-Link-Gang

A basic programmer suitable for mass-production :

• Off-line program four chips simultaneously

• LED status indicator and LCD display for programming status check

NuMicro® Family 
ItemDownload Files 
1 Nu-Link-Gang Programmer Software  • ICP Programming Tool • Nu-Link Command Tool
2 NuGang Users Manual

  English  

3 NuGang Programmer Software  • NuGang Programmer

 

Nu-Link-Gang & General Nuvoton ICP Gang Adapter
NLG-128KX

• M480 Series
• M2351 Series
• M251 Series
• M031 Series

LQFP128 ( 14 mm x 14 mm )
NLG-64S

• M480 Series
• M2351 Series
• M251 Series
• M031 Series
• M261 Series

LQFP64 ( 7 mm x 7 mm )
NLG-48L

• M480 Series
• M251 Series
• M031 Series
• ML51 Series

LQFP48 ( 7 mm x 7 mm )
NLG-32Z • M480 Series

• M2351 Series
• M251 Series

QFN33 ( 5 mm x 5 mm )
NLG-32T

• M031 Series
• ML51 Series

QFN33 ( 4 mm x 4 mm )
NLG-144J

• M480 Series

LQFP144 ( 20 mm x 20 mm )

 

Nu-Link-Gang & Specific Nuvoton ICP Gang Adapter
NLG-NUC029SD • NUC029SDE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029SE • NUC029SEE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029SG • NUC029SGE LQFP64 ( 7 mm x 7 mm )
NLG-NUC029LD • NUC029LDE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029LE • NUC029LEE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029LG • NUC029LGE LQFP48 ( 7 mm x 7 mm )
NLG-NUC029NA • NUC029NAN QFN48 ( 7 mm x 7 mm )
NLG-NUC029ZA • NUC029ZAN QFN33 ( 5 mm x 5 mm )
NLG-NUC029TA • NUC029TAN QFN33 ( 4 mm x 4 mm )
NLG-NUC029FA • NUC029FAE TSSOP20 ( 4.4 mm x 6.5 mm )
NLG-NUC121Z • NUC121 / NUC125 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC123Z • NUC123 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC125L • NUC121 / NUC125 Series LQFP48 ( 7 mm x 7 mm )
NLG-NUC125Z • NUC121 / NUC125 Series QFN33 ( 5 mm x 5 mm )
NLG-NUC126N • NUC126 Series QFN48 ( 7 mm x 7 mm )
NLG-NUC126S • NUC126 Series LQFP64 ( 7 mm x 7 mm )
NLG-NUC200S • NUC200 Series LQFP64 ( 7 mm x 7 mm )

Share

Enter the Email address you like to share*
Your email*
Your name*
Validate Code*

User Feedback

Please rate our website
Email
Name*
Validate Code*

微信扫一扫,关注新唐MCU。

Login myNuvoton

to stay informed of any changes to the documents you download.
If you don't want to login, just close this page and download directly.