FAQ

FAQ No.:0000134  Issue Date:2016-07-18

How to use the Virtual COM Port of Nu-Link-Me?

Besides the programming and debugging features, the Nu-Link-Me Version 3.0 (or later) supports the Virtual COM Port function. Through the Virtual COM Port, the user can display UART messages on communication software (e.g. HyperTerminal) of a computer.
The user needs to switch the SW3 (IDP Switch) on the Nu-Link-Me to ON to enable and use the Virtual COM Port.
In addition, the user needs to connect the UART_TXD and UART_RXD of a target chip to the JP2 of the Nu-Link-Me, as shown below.

 

Products: ARM Cortex™-M0 MCUs , ARM Cortex™-M4 MCUs
Applications:
Function: Nu-Link-Me (ICE) , Nu-Bridge Software Tool
Keyword:

Share

Enter the Email address you like to share*
Your email*
Your name*
Validate Code*

User Feedback

Please rate our website
Email
Name*
Validate Code*

微信扫一扫,关注新唐MCU。

Login myNuvoton

to stay informed of any changes to the documents you download.
If you don't want to login, just close this page and download directly.