Online Support

NuMaker emWin M487

  • Overview
  • Resources
  • Where to buy

NuMaker emWin M487 platform is an advanced HMI emWin development board based on NuMicro M487 MCU which is belong to NuMicro M480 series, a series of coetex-M4 MCUs with up to 192 MHz core speed. NuMicro M487 supports high speed SPI (96 MHz) interface to store up to 32 MB GUI image into external SPI Flash. For connecting with TFT LCD, there are two choices by either using SPI interface or EBI interface, which supports 16-bit i80 mode TFT LCD with up to 320x240 resolution.

NuMaker emWin M487 platform provides not only NuMaker-PFM-M487D but also a set of hardware and software development package including software board support package (BSP), schematic, PCB layout file, gerber file, user manual and BOM.

Features of NuMaker-PFM-M487D Development Board

  • Up to 192 MHz Cortex-M4 with DSP/FPU, which embedded 512 KB Flash and 160 KB SRAM
  • On-board 4 MB SPI Flash and 1 MB SRAM
  • On-board 124 dB of SNR, stereo audio CODEC with a headphone output
  • On-board USB full speed OTG and USB high-speed OTG
  • On-board SD card slot
  • On-board 10/100 Mbps Ethernet (RJ-45)
  • On-board 3.4” (320x240) LCD panel, 16-bit i80-system
  • On-board six-axis (gyro + accelerometer) MEMS

NuMaker PFM M487




User Manual

Nuvoton Official Forum


Nuvoton eStore


TechDesign eMarket (Partner Channel)

*Ordering Number: NKBEDM487D

Data Sheet

  • Software

  • File name Version Update Download
  • 3.04.000  2019/07/16
  • Development Tool

  • File name Version Update Download
  • HW_M487_LV2_Advance_Board_V4.0 V4.0   2018/06/21
  • Online Training

  •   Name Published date Online certificate
  • Nuvoton - NuMaker emWin N9H20 Introduction 2018/11/05
  • Nuvoton - NuMaker emWin M487D Introduction 2018/11/05
  • Nuvoton - Build up emWin Project 2018/11/05
  • Nuvoton - Use emWin GUI Builder to easily create GUI 2018/11/05
  • User Manual

  • File name Version Update Download
  • UM_NuMaker-PFM-M487_User_Manual_EN_Rev1.01 1.01  2019/04/10
  • UM_NuMaker-emWin-M487_User_Manual_EN_Rev1.01 1.01  2018/09/27
  • UM_NuMaker_M487_Advance_User_Manual_EN_Rev1.00 1.00  2018/06/14


Enter the Email address you like to share*
Your email*
Your name*
Validate Code*
This Family has not been mapped to a table

User Feedback

Please rate our website
Validate Code*


Login myNuvoton

to stay informed of any changes to the documents you download.
If you don't want to login, just close this page and download directly.