NuMicro M2L31 系列基於 Arm Cortex-M23 核心，配備了 64 到 512 KB 的 ReRAM，是一款致力於永續性和能源效率的超低功耗產品 產品資訊：https://www.nuvoton.com/products/microcontrollers/arm-cortex-m23-mcus/m2l31-series/?utm_source=youtube&utm_medium=video_ic_intro #Nuvoton #NuMicro #M2L31 #UltraLowPower #ReRAM #ArmCortexM23 #Security #PowerEfficiency #USB2.0 #Type-C #PD3.0 #highdensitymemory #CANFD #MCU#Microcontroller #General #Product #Others #zh-Hant - 更多產品資訊，請至新唐科技網站 https://www.nuvoton.com/?utm_source=youtube&utm_medium=video&utm_campaign=all 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

The NuMicro M2L31 series is based on Arm Cortex-M23 core featuring 64 to 512 Kbytes ReRAM — an ultra-low-power product designed with a commitment to sustainability and energy efficiency. More info: https://www.nuvoton.com/products/microcontrollers/arm-cortex-m23-mcus/m2l31-series/?utm_source=youtube&utm_medium=video_ic_intro #nuvoton #NuMicro #Microcontroller #MCU #M2L31 #UltraLowPower #ReRAM #ArmCortexM23 #Security #PowerEfficiency #USB2.0 #Type-C #PD3.0 #highdensitymemory #CANFD #MCU#Microcontroller #General #Product #Others#en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

大家好，我是新唐的 FAE 我叫 Nick 接下來我就跟大家介紹新唐的 3D TOF sensor 這台 TOF sensor，他主要的傳輸介面是通過 Type C 的傳輸介面 將偵測到的 3D 的深度資訊，傳送到電腦端給大家看到深度的資訊 接下來我來跟大家介紹怎樣去操作這台 3D TOF sensor 他是使用這個 DepthViewer Tool，去操作這個 3D TOF sensor 這邊我們開啟 Start 這個按鈕之後，就可以開始實時的去擷取這個深度的資訊 我們可以看到，這邊有不同的一個深度場景的資訊 可以用滑鼠的移標去指到你感興趣的區塊 而得知這個目前他的物件它主要的深度跟遠度的一個資訊 這個深度跟遠度資訊，我們主要使用的兩種模式 這邊有 Mode 1 跟 Mode 2 的模式 Mode 1 的模式主要是去擷取比較近的一個物質 Mode 2 主要是屬於比較遠的物質 Mode 1 的話他主要是 200~1200 mm 距離 Mode 2 是比較遠的 1000~6500 mm 距離 可以根據使用者一些就是使用場景去更換不同的模式 右邊可以看到說，這邊深度實時的場景有黑色的區塊 那如果目標遠的話，會有黑色區塊，那這是因為我們物體比較近的話 他會造成曝光會比較低，他的整個區塊變成白色的一個區塊 這個時候我要去調整這一個 Exposure 曝光值 如果說比較遠的話，會有一個黑色的區塊 你就要去調整這曝光值到 600 的區間 所以說我們可以根據這個目前的場景 去寫入跟讀取這曝光值的大小，去調整這個物件距離在哪裡 以上我跟大家介紹這個 3D TOF sensor 的一個使用方式 謝謝大家 #zh-Hant #Application #Seminar #General - 【2021 Roadshow專區】 精彩內容：https://www.nuvoton.com/roadshow2021 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

嗨，大家好我是新唐產品應用工程師 Aaron 今天為各位介紹的是新唐安全微控制開發平台 - NuMaker-IoT-M2354 NuMaker-IoT-M2354 開發板上帶有新唐 - NuMicro M2354 微控制器，採用封裝為 LQFP128。在正式介紹開發平台前，先快速帶領大家了解 NuMicro M2354 的各項特色，M2354 是基於 Arm® Cortex®-M23，新唐最新一代的安全物聯網微控制器，除了 CPU 本身具備的 TrustZone 安全防護功能，讓您在單一 CPU 內實現安全及非安全區的管理。全系列皆帶有 1 MB Flash, 256 KB 的 SRAM，讓使用者更能專注於軟體的開發而不需擔心資源不足的問題。這點在物聯網裝置常需搭配 OS 做開發來說來說，尤為重要。 M2354 提供豐富的周邊，除了基本的 UART, I²C, SPI，更支援 Quad SPI , USB FS OTG, SD Host 以及 CAN BUS，而為了便於物聯網裝置常有的數據顯示需求，M2354 支援了 COM/SEG LCD，多達 320 點的 LCD 驅動器，能夠滿足各種智慧家庭及物聯網應用。 除了豐富周邊，M2354 最大特色就是支援了許多安全功能：Secure boot 提供根信根機制，能確保運行軟體的合法法及完整性，RSA ECC AES SHA 各種加密算法能加速聯網時，所需要的認證及資料加密需求，搭配 key store的使用能將加解密的過程提升到更高的安全層次。 而為了能符合 PSA CertifiedTM Level 3 (物聯網認證標準) 的安全需求，M2354 針對非侵式的攻擊手法也提供了對應的安全防護措施，防止如側信道及故障故入等攻擊。 那緊接著介紹我們今天的主題，NuMaker-IoT-M2354 基於上述的特色及安全規劃，我們認為 M2354 非常適合作為物聯網裝置的開發平台，因此製作了一片開發板，希望能加速使用者孰悉 M2354 的開發及應用。NuMaker-IoT-M2354 搭載 Bosch BME680 環境感測器，能偵測 VOC (揮發性有機物) 氣壓、溫濕度等指數，藉由 MBED OS 開發平台提供的完整連雲範例以及 M2354 支援的各種加密加速器，可實時且安全的將數據送往雲端 (如 Pelion，AWS)。開發者也可同步將數據顯示在 LCD 屏上，新唐BSP 提供完整屏的函示庫做為快速開發使用。 NuMaker-IoT-M2354 平台提供 Wi-Fi 及 LoRa 兩種無線模組，使用者可根據資料傳遞量及功耗表現等需求來決定想採用的無線連接方式，其中需注意的是若使用 LoRa 模組進行連雲開發，則還須搭配新唐推出的 NUC980 LoRa Gateway。NuMaker-IoT-M2354 的 LoRa 模組共支援兩種頻段，分別為 915MHz/433MHz，使用者可在依據開發需求來做選購。 除了提供豐富周邊，為了讓使用者能有更為彈性的開發介面，NuMaker-IoT-M2354 同時支援了 Arduino UNO 及 mikroBUS 兩種擴充應用，若使用者有 NB-IoT 或者 4G-LTE 等連線開發需求，新唐同時也提供這兩種模組的 Arduino UNO 開發板可以與 NuMaker-IoT-M2354 做搭配使用 (Quectel-BG96A for NB-IoT/ Quectel-EC21A for 4G-LTE)。 除此之外，板子上也提供多種電源供應介面及耗電量測介面以及 Nu-link2-Me 燒錄偵錯開發工具，能支援 BSP 透過 Keil IAR GCC 進行開發，也支援 Mbed IDE 開發系統。 以上就是今天為大家所做的介紹，若有任何問題都歡迎與我們聯繫，謝謝。 #zh-Hant #Learning #Intermediate #application - 相關開發工具及購賣連結： ● M2354 Series https://www.nuvoton.com/products/microcontrollers/arm-cortex-m23-mcus/m2354-series/ ● NuMaker-LoRa-NUC980 https://www.nuvoton.com/products/iot-solution/lora-platform/index.html ● NuMaker-M2354 https://direct.nuvoton.com/tw/numaker-m2354 ● Quectel-BG96A https://direct.nuvoton.com/tw/quectel-bg96a ● Quectel-EC21A https://direct.nuvoton.com/tw/quectel-ec21a #zh-Hant #Learning #Basic #Application #Product #Nuvoton #NuMicro #新唐科技 #MCU #微控制器 #M2354 #TrustZone #安全 #物聯網 #NuMaker-IoT-M2354 #IoT #Arm®Cortex®-M23 #M23 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們： SalesSupport@nuvoton.com

#zh-Hant #Application #Seminar #General - 【2023 Roadshow專區】 精彩內容：https://www.nuvoton.com/roadshow2023 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

新唐 NuMicro 微控制器家族 I²C 範例程式介紹 - 演示如何透過 I²C 介面來對 EEPROM 做資料的存取。 #Training #Basic #zh-Hant #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

新唐 NuMicro 微控制器家族 I²C 基本功能與範例介紹。 #Training #Basic #zh-Hant #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

M0A23是一款汽車級微控制器，通過了AEC-Q100 Grade 1認證。M0A23是基於Cortex-M0架構的微控制器。NuMicro® M0A23系列運行時脈可達48 MHz並支持硬體除法器。該微控制器提供32 KB的Flash記憶體和4 KB的SRAM。它提供了小巧的封裝、豐富的模擬外設、-40°C至125°C的工作溫度範圍，以及2.4V ~ 5.5V的工作電壓。此外，它還擁有CAN 2.0B和LIN接口，以實現穩健的通信。 #AEC-Q100 #125度 #125degree #M0A23 #微控制器 #車用 #Basic #Product #Learning #zh-Hant #Nuvoton #NuMicro #MCU #新唐科技 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

M0A23 is an automotive grade microcontroller which passed AEC-Q100 Grade 1. M0A23 is an microcontroller based on Cortex-M0. The NuMicro® M0A23U series runs up to 48 MHz and supports hardware divider. It provides 32 Kbytes Flash memory, 4 Kbytes SRAM. It provides compact package, rich analog peripherals, -40°C to 125°C operating temperature, 2.4V ~ 5.5V operating voltage, CAN 2.0B and LIN interface for robust communication. #AEC-Q100 #125degree #Volcano #Microcontroller #Automotive #MCU #Nuvoton #NuMicro #M0A23 #Basic #Product #learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Describe the types of MCU attacks, including software attacks, non-invasive hardware attacks, and invasive hardware attacks, with examples of each attack type. #en #Learning #Intermediate #Application - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

The NAU82011YG is a highly efficient, filter-free, mono Class-D audio amplifier with variable gain, which is capable of driving a 4Ω load with up to 2.9W output power. This device provides chip enable pin with extremely low standby current and fast start-up time of 4ms. The NAU82011YG is ideal for battery driven portable applications. NAU82011YG features 91% efficiency, low quiescent current (i.e. 1.25mA at 3.6V) and superior EMI performance. The audio input of this device can be configured as either single-ended or differential input mode. Target Applications: • Portable Audio Device/Speaker • Portable Navigation Device • Tablet PC Key Features: • Audio Input - Differential / Single-end input - DC PSRR Typ.@95dB - CMRR Typ.@63dB • Audio Output - Powerful Mono Class-D Amplifier - 2.9W (4Ω @ 5V, 10% THD+N) - 2.3W (4Ω @ 5V, 1% THD+N) - Low Output Noise: 20 μVRMS • Advance Feature - Low Current Shutdown Mode - Click-and Pop Suppression - Integrated Image Reject Filter - Integrated feedback resistor of 300 kΩ • Operating Characteristics - voltage range: 2.5 V to 5.5 V - Temperature range: -40°C to 85°C - Low Quiescent Current: 1.2mA@3.6V, 1.7mA@5V • Package - WLCPS-9

Hello everyone, I am Morgan, the principal engineer of Nuvoton Technology. Today, I will show you how to use 4G LTE or NB-IoT with Mbed OS on NuMaker-IoT-M487 development board. This tutorial needs a cellular expansion board to work with NuMaker-IoT-M487 development board. You can purchase the 4G LTE expansion board, RF-EC21A, on Nuvoton Direct (https://direct.nuvoton.com/communication-module/). Please install your 4G LTE SIM card in the mini SIM card slot on the back, and install the antenna at the MAIN connector on the front of the board. Although there is an NB-IoT expansion board, it requires an NB-IoT SIM card. Using LTE is more convenient. Just use your own LTE SIM card which has data plan. Then install the expansion board to the Arduino UNO connector of the NuMaker-IoT-M487 development board. Because the power consumption of the 4G LTE module is higher, it is not enough to supply power from USB only. You need to plug in the 5V/2A power supply. If you use NB-IoT module, no additional power supply is needed. We used “New” to select a template to create a new project. This time, we use the example on GitHub to create a new project. The URL of template used for this tutorial is https://github.com/OpenNuvoton/NuMaker-mbed-Cellular-example In chrome browser, enter the URL https://ide.mbed.com to use Mbed Online Compiler environment. After you log in, make sure that NuMaker-IoT-M487 board already selected in the upper right corner. If not, please refer Nuvoton IoT Tutorial series “Get Started with Mbed OS” which has a detailed description of how to add a board. Click the second option “Import” on the upper left. In the Import Wizard, click “Click here” On the “Source URL:”, enter the tempalte URL https://github.com/OpenNuvoton/NuMaker-mbed-Cellular-example . Then move mouse cursor to “Import Name:” and click it, the Project name will be automatically fill in. Then click “Import” button. Now you can see that the sample code has loaded. Depending on the cellular module used, the configuration may need to be modified. Click on “Readme.md” to open it. It lists configurations for supported cellular modules. Because the tutorial uses RF-EC21A expansion board which includes a Quectel EC21 LTE module, let’s check and modify the configuration in mbed_app.json file. Click the “mbed_app.json” file to open it. It is a JSON file to customize compile time configuration parameters in Mbed OS. The “*” (asterisk) in “target_overrides” session indicates all development boards are applicable. You can set in the designated board session, so the settings are only applicable to the specified board. The default mbed_app.json file in the example has configured for RF-EC21A. Such as, "target.network-default-interface-type" has set to "CELLULAR" for cellular connection. Both "lwip.ppp-enabled” and "lwip.tcp-enabled" set to true. Use generic AT3GPP driver for RF-EC21A ("GENERIC_AT3GPP.provide-default": true) And the RF-EC21A UART connects on Arduino D0/D1 ("GENERIC_AT3GPP.tx": "D1" and "GENERIC_AT3GPP.rx": "D0") When your SIM card installed in your mobile phone, you can find the APN, username and password settings in your mobile phone. Or contact your telecom operator to get this information. In the example, APN has set to “internet”, no username, and no password. (Move mouse cursor around these settings) The final setting to check is PIN code. In the example, the setting is no PIN code. If your SIM card has PIN code, for example 1234, please set it like this “\”1234\”” (Move mouse cursor around the setting) Save it then build it. It is in compiling, please wait a moment. Then you can see the last message is “Success!”. The browser will download the binary firmware file directly after a successful compiling. It will be saved in a default download folder or the folder based on your browser setting. In Chrome, you can click download file and select “Show in folder”. Then we connect the NuMaker-IoT-M487 USB port to your computer and don’t forget to plug in external 5V power supply. Please find the virtual COM port assigned for NuMaker-IoT-M487 in Device Manager. In the demonstration, the “Nu-Link Virtual Com Port” is COMx. Then use your favorite terminal tool. Here we use Putty. Open the COMx port with 115200 baud rate, 8 bits, 1 stop bit, none parity, and no flow control settings. Then “Open” it. Let’s back to the download folder where you can see the binary firmware file (NuMaker-mbed-Cellular-example.NUMAER_IOT_M487.bin). Drag and drop the file to NuMicro MCU drive. You will see the copying progress dialog box. You can see the connection messages printed on terminal. It shows that the board creates a TCP connection to server “echo.mbedcloudtesting.com”, send 4 bytes data and get the data back from server. That’s all for this tutorial. Thank you. For more information, please visit Nuvoton Technology: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/numaker-iot-m487 #tool #training #learning #intermediate #en