Evaluation Board
Based on Arm® Cortex®-M0/M4 core MCUs | Based on 8051 MCUs | Based on Arm9 MPUs | Quick Start | Chip Library

Based on Arm® Cortex®-M0/M4 core MCUs

Part No.Ordering No.DownloadContentSupported
Devices
Evaluation / Development Kit forPicture
NuMaker-PFM-M487 NK-BEDM487 User Manual
Schematic, PCB & Gerber File
  • Board of NuMaker-PFM-M487
M480
M487

NuMaker-PFM-M487 is the development board of NuMicro M480 series.

  • M487JIDAE (LQFP144)
  • 2MB SPI Flash
  • Audio CODEC
  • SD Card slot
  • Micro-USB – full speed OTG
  • Micro-USB – high speed OTG
  • RJ-45 – 10/100Mbps Ethernet
  • 3.5mm phone jack
  • Arduino UNO interface
NuMaker-PFM-M487_V2.0(Mbed)

NuMaker emWin M487

NK-BEDM487D

User Manual
Schematic, PCB & Gerber File

 

  • Board of NuMaker-PFM-M487
  • Daughter board with LCD panel
M480
M487

NuMaker-PFM-M487 is the development board of NuMicro M480 series. The daughter board provides additional LCD display for GUI development with emWin.

  • M487JIDAE
  • 2MB SPI Flash
  • Audio CODEC
  • SD Card slot
  • Micro-USB – full speed OTG
  • Micro-USB – high speed OTG
  • RJ-45 – 10/100Mbps Ethernet
  • 3.5mm phone jack
  • Arduino UNO interface
  • LCD display
  • 1MB SRAM
  • CAN Transceiver
  • RS485 Transceiver
  • MEMS MPU6500
  • EEPROM
  • Mikro Bus
M487 Advance Ver4.0 NuMaker-PFM-M487
NuMaker-ETM-M487 NK-BEDM487E

 

User Manual
Schematic, PCB & Gerber File
  • Board of NuMaker-ETM-M487
M480
M487

NuMaker-ETM-M487 is the development board of NuMicro M480 series as well. Different from NK-BEDM487, NK-BEDM487E supports Embedded Trace Macrocell (ETM) facilities but removes the RJ-45 and external components.

  • M487JIDAE (LQFP144)
  • Micro-USB – full speed OTG
  • Micro-USB – high speed OTG
  • Arduino UNO interface
NuMaker-ETM-M487
NuMaker-PFM-M2351 NK-BEDM2351 User Manual
Schematic, PCB & Gerber File
  • NuMaker-PFM-M2351 Board
M2351

NuMaker-PFM-M2351 is the development board of NuMicro M2351 series.

  • M2351KIAAE (LQFP128) based on Arm® Cortex®-M23 core
  • TrustZone® for ARM®v8-M
  • Running up tp 64 MHz
  • Up to 512 KB of dual bank flash memory
  • Up to 96 KB SRAM
  • Secure Serial Flash(W77F32W) for secure data storage, cryptographic key storage, and general data storage
  • Wi-Fi module for wireless application
  • On-board Nu-Link-Me ICE Bridge (Mass storage as USB Disk drive) for drag and drop programming
  • Arduino UNO compatible interface

M2351 extended interface connectors

NuMaker-PFM-M2351_V1.3(修)
NuTiny-SDK-M0564V NT-M0564V

User Manual
Schematic, PCB & Gerber File

 

  • Nu-Link-ME
  • NuTiny-EVB-M0564
M0564V
  • An Evaluation/Development Kit for NuMicro
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-M0564 V1.0

NuTiny-SDK-NUC126V

NT-NUC126V User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-NUC126V
NUC126V
  • An Evaluation/Development Kit for NuMicro
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC126(正) V1.0
NuTiny-SDK-Mini51L NT-Mini51L
  • Nu-Link-ME
  • NuTiny-EVB-Mini51
  • An Evaluation/Development Kit for Mini51 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Mini51
NuTiny-SDK-Mini51F NT-Mini51F


  • Nu-Link-ME
  • NuTiny-EVB-Mini54FDE
  • An Evaluation/Development Kit for Mini51 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Mini54FDE_V1.0
NuTiny-SDK-Mini55L NT-Mini55L
User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-Mini55L
Mini55
  • An Evaluation/Development Kit for NuMicro
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny_EVB_Mini55
NuTiny-SDK-Mini57E NT-Mini57E

 

User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-Mini57E
Mini57
  • An Evaluation/Development Kit for NuMicro
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Mini57 V1.0
NuTiny-SDK-Mini58L NT-Mini58L

  • Nu-Link-ME
  • NuTiny-EVB-Mini58
 
  • An Evaluation/Development Kit for Mini58 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-MINI58_s
NuTiny-SDK-M051L NT-M051L
  • Nu-Link-ME
  • NuTiny-EVB-M051
  • An Evaluation/Development Kit for M051 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-M051
NuTiny-SDK-M058SF NT-M058SF
User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-M058SF
M058S
  • An Evaluation/Development Kit for NuMicro series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-M058
NuTiny-SDK-M058SS NT-M058SS
  • Nu-Link-ME
  • NuTiny-EVB-M058S
  • An Evaluation/Development Kit for M058 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-M058S
NuTiny-SDK-M0518S NT-M0518S
  • Nu-Link-ME
  • NuTiny-EVB-M0518
  • An Evaluation/Development Kit for M0518 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-M0518
NuTiny-SDK- M0519V NT-M0519V

  • Nu-Link-ME
  • NuTiny-EVB-M0519
  • An Evaluation/Development Kit for M0519 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-M0519-LQFP100
NuTiny-SDK-NUC029L NT-NUC029L

  • Nu-Link-ME
  • NuTiny-EVB-NUC029L
  • An Evaluation/Development Kit for NUC029xAN series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NUC029LAN
NuTiny-SDK-NUC029F NT-NUC029F

  • Nu-Link-ME
  • NuTiny-EVB-NUC029F
  • An Evaluation/Development Kit for NUC029FAE series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NUC029FAE
NuTiny-SDK-NUC029SD NT-NUC029SD
User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-NUC029SD
NUC029SDE
  • An evaluation/development Kit for NuMicro
  • IAR EWARM or Keil RV/MDK (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
NuTiny-SDK-NUC029SE NT-NUC029SE
User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-NUC029SE
NUC029SEE
  • An evaluation/development Kit for NuMicro
  • IAR EWARM or Keil RV/MDK (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
NuTiny-SDK-NUC100V NT-NUC100V
  • Nu-Link-ME
  • NuTiny-EVB-NUC100V
  • An Evaluation/Development Kit for NUC100 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC100
NuTiny-SDK-NUC120V
NT-NUC120V

  • Nu-Link-ME
  • NuTiny-EVB-NUC120
  • An Evaluation/Development Kit for NUC120 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC120
NuTiny-SDK-NUC121S NT-NUC121S

  • Nu-Link-ME
  • NuTiny-EVB-NUC121
  • An Evaluation/Development Kit for NUC121 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC122S NT-NUC122S

  • Nu-Link-ME
  • NuTiny-EVB-NUC122
  • An Evaluation/Development Kit for NUC122 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC122
NuTiny-SDK-NUC123S NT-NUC123S
  • Nu-Link-ME
  • NuTiny-EVB-NUC123
  • An Evaluation/Development Kit for NUC123 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC123
NuTiny-SDK-NUC125S NT-NUC125S
  • Nu-Link-ME
  • NuTiny-EVB-NUC125
  • An Evaluation/Development Kit for NUC125 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC131S NT-NUC131S

  • Nu-Link-ME
  • NuTiny-EVB-NUC131
  • An Evaluation/Development Kit for NUC131 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NUC131
NuTiny-SDK-NUC140V NT-NUC140V
  • Nu-Link-ME
  • NuTiny-EVB-NUC140
  • An Evaluation/Development Kit for NUC130/140 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC140
NuTiny-SDK-NUC200V NT-NUC200V

  • Nu-Link-ME
  • NuTiny-EVB-NUC200
  • An Evaluation/Development Kit for NUC200 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC200
NuTiny-SDK-NUC220V NT-NUC220V

  • Nu-Link-ME
  • NuTiny-EVB-NUC220
  • An Evaluation/Development Kit for NUC220 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC220
NuTiny-SDK-NUC240V NT-NUC240V
  • Nu-Link-ME
  • NuTiny-EVB-NUC240
  • An Evaluation/Development Kit for NUC230/240 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC240
NuTiny-SDK-Nano100K NT-Nano100K

  • Nu-Link-ME
  • NuTiny-EVB-Nano100
  • An Evaluation/Development Kit for Nano100 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Nano100
NuTiny-SDK-Nano120K
NT-Nano120K

 

  • Nu-Link-ME
  • NuTiny-EVB-Nano120
  • An Evaluation/Development Kit for Nano120 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Nano120
NuTiny-SDK-Nano130K NT-Nano130K
  • Nu-Link-ME
  • NuTiny-EVB-Nano130
  • LCD Module
  • An Evaluation/Development Kit for Nano130 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Nano130
NuTiny-SDK-Nano102S NT-Nano102S
  • Nu-Link-ME
  • NuTiny-EVB-Nano102
  • An Evaluation/Development Kit for Nano102 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Nano102
NuTiny-SDK-Nano103S NT-Nano103S User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-Nano103
Nano103
  • An Evaluation/Development Kit for Nano103 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NANO103_V1.1_正面
NuTiny-SDK-Nano112V NT-Nano112V
  • Nu-Link-ME
  • NuTiny-EVB-Nano112
  • LCD Module
  • An Evaluation/Development Kit for Nano112 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-Nano112
NuTiny-SDK-NUC442J NT-NUC442J
  • Nu-Link-ME
  • NuTiny-EVB-NUC442
  • An Evaluation/Development Kit for NUC442 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NUC442
NuTiny-SDK-NUC472H NT-NUC472H
  • Nu-Link-ME
  • NuTiny-EVB-NUC472
  • An Evaluation/Development Kit for NUC442/472 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-NUC472
NuTiny-SDK-M451V NT-M451V
  • Nu-Link-ME
  • NuTiny-EVB-M451
  • An Evaluation/Development Kit for M451 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-M451
NuTiny-SDK-M4521S NT-M4521S
User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-M4521
M4521
  • An Evaluation/Development Kit for M4521 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-SDK-M451
NuTiny-SDK-NUC505Y NT-NUC505Y
  • Nu-Link-ME
  • NuTiny-EVB-NUC505
  • An Evaluation/Development Kit for NUC505 series
  • Supported by IAR EWARM/Keil RVMDK
  • Support On-line ICP (In-Circuit Programming)
NuTiny-EVB-NUC505

Based on 8051 core MCUs

Part No.Ordering No.DownloadContentSupported
Devices
Evaluation / Development Kit forPicture
 NuTiny-N76E003 NT-N76E003

User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-N76E003
N76E003
  • An evaluation/development Kit for Nuvoton 8051
  • IAR EW8051 or Keil C51 (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
NuTiny-SDK-N76E003_V2.0
NuTiny-N76E616 NT-N76E616

User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-N76E616
N76E616
  • An evaluation/development Kit for Nuvoton 8051
  • IAR EW8051 or Keil C51 (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
N76E616 Tiny Board_正
NuTiny-N76E885 NT-N76E885

User Manual
Schematic, PCB & Gerber File
  • Nu-Link-ME
  • NuTiny-EVB-N76E885
N76E885
  • An evaluation/development Kit for Nuvoton 8051
  • IAR EW8051 or Keil C51 (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
NuTiny-EVB-N76E885_V2.1
NuTiny-N79E715 NT-N79E715

User Manual
  • Nu-Link-51
  • NuTiny-EVB-N79E85J
N79E715
  • An evaluation/development Kit for Nuvoton 8051
  • IAR EW8051 or Keil C51 (evaluation version) can be download from website
  • Support ICP (In-Circuit Programming)
N79E715_81x

Based on Arm9 MPUs

Part No.Ordering No.DownloadContentSupported
Devices
Evaluation / Development Kit forPicture

NuMaker emWin RDK-N9H20

RDK-N9H20 emWin
BuyOnline
User Manual
Schematic, PCB & Gerber File
  • Board of RDK-N9H20
N9H RDK-N9H20 emWin reference design,Passed 4 kV ESD test.
FEATURE:
CPU : 200 MHz ARM926EJ-S ( N9H20K51N ) MCP 32 MB DDR memory
LCD : 4.3” 480 x 272 TFT LCD,True color (24 bit)LCD, Resistive touch
Memory : 1 Gb NAND / 8 MB SPI NOR
Communication interface : UART x 1
Development environment requirements
  • Windows 7 / 8 / 10 1GHz PC
  • ARM MDK Plus 4 / 5
  • JTAG ICE
NuMaker emWin RDK-N9H30 RDK-N9H30 emWin
BuyOnline
User Manual
Schematic, PCB & Gerber File
  • Board of RDK-N9H30
N9H

RDK-N9H30 emWin reference design,Passed 4 kV ESD test FEATURE:
CPU : 300 MHz ARM926EJ-S ( N9H30F51I ) MCP 32 MB DDR memory
LCD : 5” 480 x 272 TFT LCD,True color(24 bit)LCD, Resistive touch
Memory : 1 Gb NAND / 8 MB SPI NOR
Communication interface : UART x 1, Ethernet x 1
Development environment requirements

  • Windows 7 / 8 / 10 1GHz PC
  • ARM MDK Plus 4 / 5
  • JTAG ICE

Quick Start

- Based on 8051 core MCUs

Part No.ContentPicture
NuMaker-ML51PC

The NuMaker-ML51PC development board consists of two parts, a ML51PC0AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-ML51PC allows users to quickly develop and easily program and debug application.

NuTiny-ML51EB

The NuTiny-ML51EB development board consists of two parts, a ML51EB9AE platform and an on-board Nu-Link-Me debugger and programmer. The NuTiny- ML51EB allows users to quickly develop and easily program and debug application.

NuTiny- MS51FB

The NuTiny- MS51FB development board consists of two parts, a NuMicro® 8051 MS51FB9AE platform and an on-board Nu-Link-Me debugger and programmer. The NuTiny- MS51FB allows users to quickly develop and easily program and debug application.

NuTiny- MS51DA The NuTiny- MS51DA development board consists of two parts, a NuMicro® 8051 MS51DA9AE platform and an on-board Nu-Link-Me debugger and programmer. The NuTiny- MS51DA allows users to quickly develop and easily program and debug application.

- Based on Arm® Cortex®-M0 core MCUs

Part No.ContentPicture
NuMaker-M031TC

The NuMaker-M031TC development board consists of two parts, a M031TC1AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M031TC allows users to quickly develop and easily program and debug application.

NuMaker-M031TC
NuMaker-M031SD

The NuMaker-M031SD development board consists of two parts, a M031SD2AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M031SD allows users to quickly develop and easily program and debug application.

NuMaker-M031TB

The NuMaker-M031TB development board consists of two parts, a M031TB0AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M031TB allows users to quickly develop and easily program and debug application.

NuMaker-M032SE

The NuMaker-M032SE development board consists of two parts, a M032SE3AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M032SE allows users to quickly develop and easily program and debug application.

- Based on Arm® Cortex®-M4 core MCUs

Part No.ContentPicture
NuMaker-M483KG The NuMaker-M483KG consists of two parts, a M483 platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M483KG allows users to quickly develop and easily program and debug application.

- Based on M23 core MCUs

Part No.ContentPicture
NuMaker-M263KI The NuMaker-M031TC development board consists of two parts, a M031TC1AE platform and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M031TC allows users to quickly develop and easily program and debug application.


NuMicro® Chip Library

File nameDescriptionVersionDate
NuMicro_Protel_Schematic_Library Protel Part Library for NuMicro® Family products
(supports V7.2 and up)
V1.0
08/11/2016
NuMicro_OrCAD_Library
Orcad Part Library for NuMicro® Family products
(supports V16.2 and up)
V1.0
08/11/2016
NuMicro_PADS_Library Pads Layout Library for NuMicro® Family products
(supports V9.3 and up)
V1.0
08/11/2016

Teilen

Geben Sie die E-Mail-Adresse, die Sie teilen wollen, ein.*
E-Mail*
Name*
Validierungscode*

Rückmeldung des Benutzers

Bitte bewerten Sie unsere Website
eMail
Name*
Validierungscode*

微信扫一扫,关注新唐MCU。

Anmelden bei My Nuvoton

So bleiben Sie über Änderungen an Dokumenten, die Sie herunterladen, informiert.
Wollen Sie sich nicht anmelden, schließen Sie einfach diese Seite und gehen direkt zu den Downloads.