The NuMaker Maker Platform is a development platform for IoT applications. For these users who would like to quickly design innovative IoT applications, users can use these modular modules and mobile APP to implement their expected functions. The NuMaker Maker Platform supports Wi-Fi, Bluetooth, and Ethernet communications. So far, Nuvoton offers three kinds of NuMaker Maker Platforms which includes NuMaker Brick, NuMaker Uni, and NuMaker Tomato what focus on sensors and gateway applications.

  NuMaker_Brick_Board  

The NuMaker Brick is an open source IoT platform including a combination of sensors and module which can work independently or be arranged in any order. Monitoring and the adjustment of parameter settings can be done via the NuBrick App on either Android or iOS based mobile devices or tablet computers.

       
  NK-980IIoT  

Nuvoton Technology provides industrial IoT development platform using NUC980DK61Y microprocessor, which is an industrial IoT open platform, including complete hardware design and software reference design. The platform is powered by Nuvoton ARM9 MPU with a 300 MHz internal speed and 64 MB DDR memory, single 10/100 Ethernet port, 2 high-speed USB hosts, 1 Gb SPI NAND Flash memory, microphone input, stereo headphone output and Arduino compatible interface. The platform supports embedded Linux OS which provides all IoT protocols you need, such as AWS Client / MQTT / Web Server, etc., users can use this platform to quickly develop a plenty of IoTapplications.

       
  NK-980IIoT  

Nuvoton provides industrial network control development platform using NUC980DK61Y microprocessor, which is a set of industrial network control development platform, complete hardware design and software reference design. It includes the new ARM9 MPU with core speed up to 300 MHz and built-in 64 MB DDR memory, two 10 / 100 Ethernet ports, two high-speed USB hosts, 128 Mb SPI NOR Flash storage device, two RS-485 interfaces, and eight UARTs. Platform provides Linux OS and a plenty of industrial control protocol for users to implement the Ethernet control applications in a very short time.

       
  NuMaker_Tomato   

The NuMaker Tomato is a single board computer (SBC) with simple layout. It adopts the developer-friendly open source environment, and runs on the Linux operating system. It is embedded with the 32-bit ARM926EJ-S NUC976DK62Y processor core which runs up to 300 MHz. Tomato supports Python interpreters, allowing users to generate scripts and program codes directly without the need of a compiler. It is the perfect solution for makers to create various types of customized router or geteway applications.

       
  NuMaker Uni  

The NuMaker Uni leaves 20 multifunctional pins unprogrammed to allow more flexibility in design. In low power mode, it consumes less than 1µ of electricity. With small dimensions of 3.5cm by 3.5cm, it is especially suitable for wearable devices.It integrates the 802.11 b/g/n WiFi module and bluetooth module.

       
  NuMaker-IoT-M263A  

NuMaker-IoT-M263 board is a new platform focusing on IoT products design, it integrates 9-axis sensor, environmental sensor, and popular wireless communication modules including Bluetooth module, Wi-Fi module, and LoRa module. The 2G/3G/4G-LTE/NB-IoT modules with GNSS function are available for purchase. With the IoT software package provided by Nuvoton, connecting the cloud of Arm Pelion, Amazon AWS, and Ali-Cloud is hazard-free. And the development of IoT products can be completed quickly.

NuMicro® M261/M262/M263 series microcontroller is based on Arm® Cortex®-M23 secure core for Armv8-M architecture, running up to 64 MHz with 512 KB Flash in dual bank mode supporting Over-The-Air (OTA) Firmware update and 96 KB SRAM. It adopts advanced low power and security technology with high performance connectivity interface. The power consumption in the normal run is down to 45 μA/MHz in DC-DC mode, lower than 2 μA in the Deep-Power-Down (DPD) mode, and it implements a secure boot function and hardware crypto acceleration to achieve the security of IoT device. It also integrates plenty of peripherals, includes QSPI, LPUART, SDHC 2.0, USB 2.0 FS OTG and CAN Bus 2.0B. For high performance analog front-end circuit blocks, it integrates two 12-bit 1 MSPS voltage type DAC, two rail-to-rail analog comparator (ACMP), and 16-channel 12-bit 3.76 MSPS SAR ADC for sensing data from sensor devices to fulfill a variety of application scenarios. Those features make it a great choice for smart home and IoT node device product design.

       
  NuMaker-PFM-M2351_V1.3(修)  

The NuMaker-PFM-M2351 is a development board based on NuMicro®-M2351 microcontroller. Nuvoton NuMicro® M2351 secure microcontroller series is empowered by Arm® Cortex®-M23 core with TrustZone® for Armv8-M architecture, which elevates the traditional firmware security to the new level of robust software security.

These M2351 microcontrollers with low-power running up to 64 MHz frequency with up to 512 K-bytes embedded flash memory in dual bank mode supporting secure OTA (Over-The-Air) firmware update and up to 96 K-bytes embedded SRAM. Furthermore, the M2351 series also provides high-performance connectivity peripheral interfaces such as UART, SPI, I2C, GPIOs, USB and ISO 7816-3 for the smart card reader. Its secure and low-power features strengthen the innovation of IoT security.

Share

Enter the Email address you like to share*
Your email*
Your name*
Validate Code*

User Feedback

Please rate our website
Email
Name*
Validate Code*

微信扫一扫,关注新唐MCU。

Login myNuvoton

to stay informed of any changes to the documents you download.
If you don't want to login, just close this page and download directly.